The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. The R1 has slim router form factor with a bay for 2.5" HDDs. It also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.
Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology.
- Dual-core 1.0GHz CPU.
- 1 GB DDR3 memory.
- Mali-400 MP2 with Open GL ES 2.0/1.1.
- 4x Gigabit LAN 1x Gigabit WAN
|CPU||A20 ARM Cortex-A7™ Dual-core|
|GPU||ARM Mali-400 MP2 with Open GL ES 2.0/1.1|
|Memory||1 GB DDR3 SDRAM|
|Storage Support||SD Card(up to 64GB)/SATA(up to 2TB)|
|Onboard Network||4x Gigabit LAN 1x Gigabit WAN|
|Video In||CSI input for video cameras|
|Audio Out||3.5 mm Jack and HDMI|
|Audio In||On board microphone|
|Power Source||Micro USB, optional 5V DC port (center positive 1,6 x 4,4mm)|
|USB Ports||2x USB 2.0|
|Buttons||Reset: next to Micro USb
Power: next to reset
Boot(optional): behind HDMI connector
|GPIO||GPIO, UART, I2C Bus, SPI Bus with two chip select,
CAN bus, ADC, PWM, +3.3v, +5v, ground
|LED||Power key and RJ45|
|OS||Android, Raspbian, Ubuntu, OpenSUSE, Debian, Bananian|
|Dimensions||92mm x 60mm|