ROBOTICS TXT valdiklis

Gamintojas: Fischertechnik
Prekės kodas: 522429
EAN: 4048962179828
Prieinamumas: Laikinai Neturime
185.00€ 275.00€
Be mokesčių: 152.89€

Kiekis

The compact ROBOTICS TXT Controller (90x90x25mm) can easily be controlled using the 2.4” color touch display. The combined Bluetooth/WiFi wireless module offers a great, wireless interface for lots of applications. The many different ports include a USB host connection, where USB sticks and devices like the fischertechnik USB camera can be connected. The integrated micro SD card slot allows you to expand the memory capacity. Multiple TXT controllers can be linked.

  • Dual processor ARM Cortex A8 (32bit/600mHz) + Cortex M3
  • Memory capacity: 256 MB DDR3 RAM, 128 MB Flash
  • Expanded memory: Micro SD card slot
  • Display: color 2.4” touch display (320x240 Pixel)
  • 8 universal inputs: Digital/Analog 0-9VDC, Analog 0-5 kΩ
  • 4 fast counting inputs: Digital, frequency up to 1kHz
  • 4 motor outputs 9V/250mA (max: 800 mA): Infinitely controllable speed, short circuit proof, alternatively 8 individual outputs for bulbs, etc.
  • Combined Bluetooth/WiFi wireless module: BT 2.1 EDR+ 4.0, WLAN 802.11
  • Infrared receiver diode: for transmitters from the fischertechnik Control Set
  • USB 2.0 Client: Mini USB port to connect to a PC
  • USB Host interface: USB-A port for fischertechnik USB camera, USB sticks and much more
  • Camera interface: via USB Host, Linux camera driver integrated into the operating system
  • Header 10-pol: to add inputs and outputs as well as I2C interface
  • Integrated speaker
  • Integrated real-time clock with exchangeable backup battery: for recording measured values within a defined time period
  • Linux based open-source operating system
  • Can be programmed with ROBO Pro, C-Compiler, PC-Library and much more
  • Connect to smartphones/tablet-PC via Bluetooth or WiFi, devices can be used as an operating panel for the controller, program via ROBO Pro Software
  • Power supply: 9V DC port 3.45 mm, or fischertechnik port 2.5 mm (for battery pack)

(!) Safety note: TXT Controller firmware version 4.2.4 or higher (!)

Please observe the following notes if the TXT Controller is operated in the so-called WLAN client mode:

  • Always activate the WLAN encryption WPA2 in the TXT WLAN settings when you connect the TXT controller in WLAN client mode to a WLAN network
  • Do not operate unknown or untrusted devices in the same wireless network with the TXT controller
  • Select WLAN keys correspondingly complex, e.g. the preset WLAN keys of the current routers
  • Do not give the WLAN key to third parties

This ensures that your TXT controller is reliably protected against unauthorized access even in this operating mode.