Soldering station 2in1 WEP 872D+ with Hotair 700W

Product Code: LUT-03569
Availability: Temporarily Out Of Stock
91.80€
Ex Tax: 75.87€

Qty

Soldering iron with increased heating power up to 75 W and hot air in one. Full power is 700 W. The device has a smooth regulation of the temperature and two LED displays. The station has a PID temperature controller. The blow is done via the compressor. Station 872D+ features automatic cooling, i.e., after the work, the hot air knob is cooled to a safe temperature, it effectively prolongs the service life of the heating element. The station has a durable metal housing. The blow of air is done through the compressor so we are sure of the long-term, trouble-free operation with the stability of the power of the blow.

Specification:

  •     Supply voltage: 230 V
  •     Power: 700 To
  •     Fan type: pump with spiral membrane of the air blow
  •     Compressor performance: max 24 l/min
  •     Soldering iron power: 72 W - 75 W
  •     Range of temperature control:
  •         Smooth adjustable temperature of hot air in the range from 100 °C to 480 °C
  •         Temperature stability: +/-1°C
  •         Smooth adjustment of temperature of the bulb in the range from 100 °C to 480 °C
  •         Temperature stability of soldering tip: +/-1°C
  •     Adjustment of air blow power
  •     LED display of the temperature of hot air
  •     LED display of the temperature of the tip
  •     Handle length: up to 100 cm
  •     The ground resistance of a soldering iron: below 2 Ω
  •     The potential of the ground of a soldering iron: below 2 mV


 
Includes:
    Soldering station WEP 872D+
    The bracket for the hotair flask
    Stand for putting the flasks off along with a sponge to clean the soldering tip
    The grotto flask
    Hotair nozzle:
        Nozzle with a diameter of 2.5 mm, model 1124
        A nozzle with a diameter of 4,4 mm, model 1130
        Nozzle with a diameter of 8 mm, model 1195
        Nozzle with a diameter of 9 mm, model 1197
    Power cable