Soldering station 2in1 WEP 992D+ with Hotair 720W

Product Code: LUT-04349
Availability: Vilnius Store In Stock
Kaunas Store Out of Stock
150.00€
Ex Tax: 123.97€

Qty

WEP 992D+ is soldering station with hot air iron and tip-base soldering iron 75 W. The device has a microcontroller PID, which checks the performance and adjusts it to the preset values. 3 programme of work - station has the ability to memorize 3 of the work programme for hot air and the soldering iron. Depending on type of works (Assembly or disassembly), you need to install the appropriate program. The operation of the hot air in automatic and manual mode: automatic - when you put down the iron, the system will turn off the heat and cool down the iron to a safe temperature, manual - when you put down the iron, the system further heats up a heating element. Before finishing it is recommended to go to auto mode. The function of temperature correction depending on external parameters. Mode C/F the ability to change the units in which temperature is displayed. Sleep function of soldering iron - if the iron is not used the given time interval (0 - 99 minutes), the system switches to sleep mode, that is cooled to a temperature of 200 °C, which ensures long service life of the device. Tip-based solderin iron with a fast heating element has a stable temperature, which is electrostatically safe.

Specification:

  •     Voltage: 220 - 240 V / 50 Hz (network)
  •     Power consumption: 720 W
  •     The station is controlled through a microcontroller that provides high stability
  •     The device has a PID controller
  •     Compact design with large and clear LCD display


Soldering Iron Hotair:

  •         Blowing air through the compressor inside the station
  •         Smooth adjustment of temperature in the range
  •         Adjustable temperature hot air from 100 °C to 480 °C
  •         Temperature stability: +/-1 °C
  •         LCD display showing actual power supply
  •         Operation mode manual / automatic
  •         Protection before reaching the high temperature and inform the alarm
  •         Cable length of the tion: up to 90 cm


Soldering Iron Tip-based:

  •         Adjustable temperature soldering tip: 200 °C to 480 °C
  •         Temperature stability: +/- 1 °C
  •         Peak power of soldering iron: from 72 to 75 W
  •         The resistance to grounding: up to 2 Ω
  •         Capacity in relation to protective earth: up to 2 mV
  •         The system is ESD safe
  •         Cable length of the iron: up to 100 cm
  •         Sleep mode: enabled after idle operation 0-99 minutes


Includes:
Station WEP 992D+ ND
Stand for the hotair iron
Set of nozzles:
        round 2.5 mm
        round with a diameter of 4.4 mm
        round with a diameter 6 mm
        round with a diameter of 9 mm
        square 12x12 mm
Stand for tip-based iron along with a cleaning sponge
Soldering iron 908B with T-B tip
A gripper for lifting circuits
Power cable