Soldering station 2in1 WEP 992DA with Hotair 700W and fume extraction

Product Code: LUT-02274
Availability: 3-5 business days
Planned delivery date after ordering: 2020-10-26
Ex Tax: 112.65€


Tip-based soldering iron, hot air iron and fume extractor in one. The total capacity of the station is 700 watts. The device has a PID controller, large and easy to read LCD display, adjustable temperature and the iron with a heating capacity of 70 W. The air flow is realized through the fan. The operation of the hot air in auto mode - when you put down the iron, the system will automatically turn off the heating and the iron cools down to a safe temperature. The function of temperature correction depending on external parameters. Mode C/F the ability to change the units in which temperature is displayed. The completion of the activation of the sleep mode of soldering iron - if the iron is not used the given time interval (0 - 99 minutes) the system switches to sleep mode, it cools down to a temperature of 200 ° C, which ensures long service life of the device. Ceramic heating element - hotair soldering iron has a ceramic heating element that quickly and evenly heats up. The heater consists of hard alloys, which allows for a long operation time at high temperatures not deformation, which increases the stability and prolongs the service life of the heater. Easy to read LCD display - temperature, power, airflow and operation mode are displayed on a large, easily readable LCD display. Extracts smoke from the soldering iron.


  •     Voltage: 220 - 240 V / 50 Hz (network)
  •     Power consumption: 700 W
  •     The station is controlled through a microcontroller that provides high stability
  •     The device has a PID controller
  •     Compact design with large and clear LCD display

Soldering Iron Hotair:

  •         Blowing air through the compressor inside the station
  •         Smooth adjustment of temperature in the range
  •         Adjustable temperature of hot air: 100-480 °C
  •         Temperature stability: +/-1 °C
  •         LCD display showing the actual power and temperature of blow
  •         Temperature setting with buttons
  •         Protection before reaching the high temperature and inform the alarm
  •         Length cable of the iron: up to 90 cm

Soldering Iron Tip-based

  •         Soldering iron 908B
  •         Adjustable temperature soldering tip: 200 °C to 480 °C
  •         Temperature stability: +/- 1 °C
  •         Soldering iron power: 70 W
  •         The resistance to grounding: up to 2 Ω
  •         Potential regarding grounding: up to 2 mV
  •         System ESD safe
  •         Cable length of the iron: up to 100 cm
  •         Sleep mode: enabled after idle operation 0-99 minutes

Station WEP 992DA+
Stand for hotair iron
Set of nozzles:
        round 2.5 mm
        round with a diameter of 4.4 mm
        round with a diameter of 7 mm
        round with a diameter of 9 mm
        square 12x12 mm
Stand for tip-based iron along with a cleaning sponge
Stand for the tin
Soldering iron 908B with a T-I tip
A gripper for lifting circuits
Power cable