Your shopping cart is empty!
Motor controllers
- Voltage to
- Voltage from
- Driver purpose
- Current
- Channel count
A4988 Stepstick Stepper Motor Driver
Anodas electronics
A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to ..
1.Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor operating current can be adjusted
2.SPI only
3.Subdivided into 256
4.Noiseless oper..
Features:1. 9V-40V DC power supply2. H-bridge bipolar constant phase flow driver3. The maximum output current is 4.0A (eight optional)4. Up to 32 segments of si..
L298 H-Bridge Dual Motor Driver
Anodas electronics
This module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two ..
DRV8825 Stepper Motor Driver Module
Anodas electronics
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface ..
Specifications:Input voltage: DC6-30VOutput voltage: Load LinearInput Current: require large than the motor operating currentOutput Current: determine load size..
The xPRO V4 Controller Stepper Driver its an all in one controller with all the necessary features to get you up and running in your build quickly and reliablyP..
Operating voltage: DC 12V-36V
Operating Current: <=15A
Driver Power: <=500W
Speed Voltage: 0.1V-5V
Operating Temperature: -40~85°C
Humidity: 90%RH
Stall p..
When you are in your project, encountered a case where the micro-controller chip pwm output pin is not enough, then this PCA9685 16 road steering to help y..
The EasyDriver is a simple to use stepper motor driver that can driver up to about 750mA per phase of a bi-polar stepper motor. EasyDriver requires a 7V to 30V ..
This module is designed for high-powered motor driver. Only a pair of this tiny module can we see their superior performance. We've also beefed up the circuitry..
MA860H DC 18-80V 7.2A Stepping Motor Driver Engraving Machine Drive Specifications:
Brand
-
Item Model
DMA860H
Working Power
DC 18-80V
Peak Cur..
1, this module is a pulse generation module, supply the control signal to stepper driver. A driver is required in order to control stepper motors. To control th..
Input Voltage: DC4 ~ 6V / 300 ~ 500mA (so we can input by any battery (not Included), or usb power supply) Motor type to be guided: Phases 4-lead-wire (3-24 V o..
This dual L298N driver module, using ST's L298N new original chip, and high stability SMT process, with high-quality electrolytic capacitors to make the circuit..
Motor drive module comes with its own four HG7881 chip.Can drive 4 DC motors, or two 4-wire 2-phase stepping motor.The module can simultaneously drive two DC mo..
The drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and overcurrent protection. Double BTS7960 H-bridg..
Operating Voltage: DC3V-35V
Control Power: 90W (maximum)
Quiescent Current: 0.015A (standby)
PWM Duty Cycle: 1% -100%
PWM Frequency: 10khz
Size: 24*30mm/0.94*1...
Specification: Type: PWM DC Motor Controller Color : black Size : about 79*42*25mm/3.11*1.65*0.98'' Net weight: about 58g Input su..
• 1. This product is suitable for speed control of universal DC motor, production line conveyor belt, pipe exhaust fan, treadmill and so on.
• 2. Op..
