Soldering station 2in1 Zhaoxin 868DH with Hotair 760W

Product Code: LUT-08760
Availability: Temporarily Out Of Stock
86.00€
Ex Tax: 71.07€

Qty

Soldering iron with a heating capacity of 75 W and hot air. The total capacity of station is 760 watts. The device has an adjustable temperature, standby mode and LED display. The blow of air is provided through a fan located in the handle. The device has a sensor in the stand, with which the station cools down the heating element in the time from 3 to 8 minutes after putting down the iron, and then automatically switches the device to low energy consumption (the so-called standby mode). This mode allows to save energy, prolong the service life of the heater and increases safety. Station remembers the set temperature.

Specification:

  •     Supply voltage: 230 V / 50 Hz (network)
  •     Power: 760 Watts
  •     The station is controlled by the microcontroller which ensures a high stability
  •     The device has a standby mode
  •     The temperature stability of the soldering tip
  •     Equipped with ergonomic housing
  •     ESD protection


Soldering Iron Hotair:

  •     Adjustable temperature hot air from 100 °C to 480 °C
  •     Temperature stability +/-1 °C
  •     LED display color blue
  •     Set temperature use the rotary controller and buttons
  •     Stepless adjustment of air blow - using a regulator
  •     Air flow up to 120 l/min
  •     The air blow is provided through a fan located in the handle
  •     The fan is driven by a brushless motor


Soldering Iron Tip-based:

  •     Regulation of the soldering tip temperature from 200 °C to 480 °C
  •     Power: 75 W
  •     Temperature stability +/- 1 °C
  •     The temperature stability of the soldering tip


In the set:
Sodlering station WEP 868DH
Hotair iron stand
Set of nozzles:
     round nozzle with a diameter of 4.5 mm
     round nozzle, with a diameter of 7.5 mm
     round nozzle with a diameter of 11.2 mm
Soldering iron stand with a cleaning sponge
Solderin iron with tip T-B