Your shopping cart is empty!
FDM 3D PrintersResin 3D printers3D scanner3D Pens3D Printing filaments3D Printing resin3D Printer maintenance and cleaning3D Printer parts3D Filament DryerUV printers
Raspberry Pi 5 and kitsRaspberry Pi 4 and kitsRaspberry Pi 3B+ and kitsRaspberry Pi 400/500Raspberry Pi Zero and accessoriesRaspberry Pi PicoRaspberry Pi CMScreens for Raspberry PiRaspberry Pi Camera modulesCases for Raspberry PiHAT extension for Raspberry PiRaspberry Pi accessoriesPower Supply for Raspberry PiRaspberry Pi memory cards with NOOBS
STM32 MicrocontrollersATmega microcontrollersFlipper ZeroTeensy - ARMAdafruit FeatherESP8266 / ESP32 WiFi ModulesM5Stack controller and accessories
CoDroneUnitree RoboticsDobotOzobotEducational kits for beginnersEducational kits for advancedRobotic Arm / ClawRobot Chassis and Accessories
Sensors - modulesWireless Communication ModulesRelay modulesDisplays and ScreensProgrammers and convertersVoltage RegulatorsPrototypingPassive electronic componentsActive electronic componentsSwitchesElectromagnets and solenoidsWearable electronics and materialsCoolingBasic Starter Kit
Motor controllersServo motorsDC motorsStepper motorsVibration MotorsBrushless MotorsElectric Linear Actuators and CylinderWater pumpsElectric motors accessoriesWheels and mounting parts for motors
AC voltage stabilizerAdjustable Lab Power SuppliesInverters DC/ACUninterruptible power supplyAlkaline BatteriesRechargeable batteryBattery Chargers Ni-Mh / Ni-Cd / Li-Ion / Li-Pol / Li-FeLi-Ion battery charging and balancing boardsAC/DC Mains powers supply adapterPower Supplies AC/DCConnection Cables, ExtendersBatteries for power toolsPlug adapter EU/UK/USCharger for Electric Bikes
Soldering toolsBattery Welding Machines and accessoriesMeasuring equipmentChemicalsTweezersElectric toolsScrewdrivers and wrenchesHot Glue GunPlier and cutting nipperInsulation removal and crimping toolKnives and scissorsMagnifying glassesFlashlightStorage boxes and OrganizersUltrasonic cleanersLabel printersTool AccessoriesPackaging Tools and Materials
CNC machines and accessoriesAluminum Extrusion ProfilesLinear ActuatorBrackets and Other Accessories for Aluminium ProfilesLinear guides and garriagesRollers on supportsTrapezoidal Screws and NutsLinear Steel RodsLinear bearingsBearingsTiming BeltsTiming PulleyLinear Rod SupportSpindle motors, converters and mount bracketsScrews and NutsCable ChainsDrills and CuttersPneumatic Accessories
AEON Laser Engraving Cutting MachineFiber Metal Marking LaserCO2 Galvo engraving-marking machineUV Marking machinexTool LASER AND BLADE CUTTING MACHINEDiode laser engraving laserLaser machine spare parts and accessoriesEngraving MaterialsLightBurn Software
Smart Control DevicesSecurity camerasGate Automation SystemsSmart LightingClimate ControlSmart Locks and Access ControlDoor bellsRobot Vacuum CleanersSmart devices for pets
Video cables and connectorsAudio cables and connectorsSpeakersSpeakers activePortable speakersAudio amplifiersAudio and video convertersMixing DesksProjectors
USB AdaptersUSB cablesUSB HUBNetwork equipmentData storages and their accesoriesComputer CoolingKeyboardsMousesMicrophonesGamingLaptop AcessoriesComputer Power SuppliesCable OrganizersMonitorsWebcamsUPS Uninterruptible power supplyOther Computer Accessories
Power BankHeadphonesMobile phone chargersPhone casesSelfie stickSmart WatchesMobile PhonesPhone batteriesTablets
Jump StartersCar Dash CamerasPhone holdersCarPlay and Android AutoMotorcycle IntercomsUSB car chargersCar FM modulatorEV Car accessoriesCar StorageCar diagnostic equipmentCar Cleaning ToolsMini CompressorsParking HeatersCar fuses and holdersCar lamps
Solar panelsOFF GRID - Solar inverterSolar ControllersON GRID - Solar inverterSolar panels AccessoriesSolar panel mountingLow power controllersWind turbine
Anycubic Kobra S1 ACE 2 Pro Combo
Brand: Anycubic
Product Code: PRM-21675
Availability: 4-6 business days
Planuojama gavimo data po užsakymo: 2026-10-16
Product Code: PRM-21675
Availability: 4-6 business days
Planuojama gavimo data po užsakymo: 2026-10-16
Ex Tax: 425.04€
height: auto
border-radius: 4px
" >Four-Color Printing with ACE 2 Pro
object-fit: contain
border-radius: 4px
" > height: 100%
object-fit: contain
border-radius: 4px
" >Active Filament Drying and Moisture Control
border-radius: 4px
" >Enclosed CoreXY Printing
border-radius: 4px
" >Nozzle, Build Plate and Material Support
border-radius: 4px
" >Touchscreen, Camera and Control Options
object-fit: contain
border-radius: 4px
" > height: 100%
object-fit: contain
border-radius: 4px
" >
Technical Specifications
border-radius: 4px
" >Four-Color Printing with ACE 2 Pro
The included ACE 2 Pro manages four filament channels for four-color printing. Four independent brushless motors and a buffering mechanism control filament feeding and retraction across the individual channels.
The system displays an estimate of the remaining filament and supports automatic filament refill based on preconfigured color and material profiles. Intelligent identification can automatically detect the parameters of compatible Anycubic filaments. This function requires an internet connection and Anycubic proprietary filament.
height: 100%object-fit: contain
border-radius: 4px
" > height: 100%
object-fit: contain
border-radius: 4px
" >Active Filament Drying and Moisture Control
ACE 2 Pro supports drying and printing at the same time, with a maximum drying temperature of 65°C. Built-in temperature and humidity sensors monitor the conditions inside the unit in real time.
An electromagnetic valve actively removes moisture, while a silicone sealing ring helps prevent external humidity from entering the storage chamber.
height: autoborder-radius: 4px
" >Enclosed CoreXY Printing
The fully enclosed CoreXY construction provides a 250 × 250 × 250 mm build volume. The recommended printing speed is 300 mm/s, with a maximum speed of up to 600 mm/s and maximum acceleration of up to 20,000 mm/s².
The motion system combines dual-motor drive with Kobra OS, resonance compensation and flow correction. A built-in accelerometer detects resonance frequency, while flow compensation adjusts filament extrusion during printing.
height: autoborder-radius: 4px
" >Nozzle, Build Plate and Material Support
The nozzle reaches temperatures up to 320°C and comes in a standard diameter of 0.4 mm. The printer also supports 0.6 and 0.8 mm nozzle diameters. The heated bed reaches temperatures up to 120°C and uses a PEI spring steel build plate.
Supported materials include PLA, PETG, TPU 95A, ABS and ASA. TPU 95A must be fed directly into the printer and is not compatible with the ACE 2 Pro for multicolor or multi-material printing.
Automated Setup and Print MonitoringLeviQ 3.0 provides automatic bed leveling and automatic Z-offset adjustment. The printer also supports pressure advance, flow calibration, filament detection with automatic resume, filament entanglement detection and power-loss recovery.
AI spaghetti detection monitors prints for abnormalities and provides alerts when an issue is detected. Additional monitoring functions include belt tension monitoring, foreign object detection, object skipping and area leveling.
height: autoborder-radius: 4px
" >Touchscreen, Camera and Control Options
The printer features a 4.3-inch capacitive touchscreen for direct operation and real-time parameter adjustment. Printing can also be controlled through slicing software, the Anycubic app or USB, with USB supporting print transfer only.
A standard HD camera supports 480p video monitoring. Noise levels are specified as low as 46 dB in standard mode and as low as 44 dB in quiet mode.
height: 100%object-fit: contain
border-radius: 4px
" > height: 100%
object-fit: contain
border-radius: 4px
" >
Technical Specifications
| Product configuration | Anycubic Kobra S1 with one ACE 2 Pro |
| Multicolor printing | Four colors with the included ACE 2 Pro |
| Printing technology | FDM |
| Construction | Fully enclosed CoreXY |
| Build volume | 250 × 250 × 250 mm |
| Recommended printing speed | 300 mm/s |
| Maximum printing speed | 600 mm/s |
| Recommended acceleration | 10,000 mm/s² |
| Maximum acceleration | 20,000 mm/s² |
| Extrusion type | Short-distance extrusion |
| Standard nozzle diameter | 0.4 mm |
| Supported nozzle diameters | 0.4, 0.6 and 0.8 mm |
| Maximum nozzle temperature | 320°C |
| Maximum heated bed temperature | 120°C |
| Build plate | PEI spring steel build plate |
| Supported materials | PLA, PETG, TPU 95A, ABS and ASA |
| TPU compatibility | TPU 95A must be fed directly into the printer and is not compatible with the ACE 2 Pro |
| Active filament drying | Supported during printing, up to 65°C |
| Firmware | Kobra OS |
| Bed leveling | LeviQ 3.0 auto-leveling with Z-offset |
| Pressure advance and flow calibration | Supported |
| Filament detection and automatic resume | Supported |
| Filament entanglement detection | Supported |
| Power-loss recovery | Supported |
| AI spaghetti detection | Supported |
| Object skipping and area leveling | Supported |
| Control and print methods | Printer touchscreen, slicing software, Anycubic app and USB USB supports print transfer only |
| Touchscreen | 4.3-inch capacitive touchscreen |
| Video monitoring | Standard HD camera with 480p support |
| Noise level | ≤46 dB in standard mode ≤44 dB in quiet mode |
| Interface languages | English, Chinese, German, French, Italian, Spanish, Russian, Japanese and Korean |
| Kobra S1 weight | 18 kg |
| ACE 2 Pro weight | 3.7 kg |
| Package weight | 25 kg |
| Package dimensions | 490 × 484 × 593 mm |
Claim orders from Stores
You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).
Please wait for an email notification regarding Your order status update.
Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva
Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva
Local delivery in Lithuania
Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.
Local delivery (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.
Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.
Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.
Payment on delivery (COD) +2.00€ (incl. VAT).
You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.
A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.
International delivery pricing through courier service
International shipping prices depend on geographic location:
Latvia - 5.50€ (incl. VAT)
Estonia - 6.50€ (incl. VAT)
Paid orders of more than 150€ are shipped for free to Latvia and Estonia.
other countries - negiotiated individually.
International delivery pricing to Omniva/Venipak parcel terminals
Latvia - 6.00€ (incl. VAT)
Estonia - 8.50€ (incl. VAT)
Payments:
We accept payments via PayPal for orders over 20€.
