Brushed DC Motor 12V - RS550VC - 9 Teeth - High Torque

If you're looking for a motor to replace a worn drive or build a simple mechanism, this model is perfect for applications requiring a 12V power supply, a 9-tooth gear, and high torque. It's a practical brushed motor for workshop, hobby, and service applications. ????

The most important factor here isn't the RS550VC designation itself, but rather whether the motor will fit your system. Before purchasing, it's worth comparing the motor type, operating voltage, and gearing on the shaft with the part you're replacing.

This is a typical motor for devices where power is transferred via a rack and pinion to a gear or other mechanism. It can be used in:

• electric toys,
• children's vehicles and simple hobby drives,
• DIY projects and amateur constructions,
• small workshop equipment,
• mechanisms requiring greater starting force. ⚙️

If your old motor was of a similar design and operated at 12V, this model may be a good replacement – provided it is mechanically compatible.

The most common mistake with this type of product is buying "by eye." Simply stating that the motor is 12V isn't enough. There are a few things to consider:

• engine model and format – here RS550VC,
• supply voltage – 12 V DC,
• sprocket – the installed sprocket has 9 teeth,
• fit to the housing and handles of the device,
• compatibility with the transmission with which the engine is to be operated.

If you're replacing a motor in a toy, model, or appliance, it's best to compare the old part with the photos and product identification. ????

In practice, this means the engine is better at moving mechanisms under load than lightweight units primarily focused on high RPMs. This is important where the drivetrain needs to start smoothly and retain its power during everyday use.

This solution is useful in systems with gears, gear wheels, and simple running gears, among other applications. This makes it easier to use the motor in drives where not only motion but also effective power transmission are important. ????

This model is worth choosing if your device requires:

• brushed DC motor,
• 12V power supply,
• RS550VC format or compatible replacement,
• 9-tooth gear cooperating with the existing gearbox.

If you're unsure, check the old motor's markings and compare the drive element. This is especially important in electric toys and mechanisms with factory-set gear ratios.

The motor is designed for 12V DC systems. When replacing or installing, ensure proper connection, firm seating, and compatibility with the device's mechanics.

• Check that the power supply to the device is exactly 12V.
• Compare the sprocket position and type with the old engine.
• Make sure the drive rotates freely and nothing is blocking the gears.
• After assembly, perform a short test without a heavy load.

This is a simple step that helps prevent damage to the transmission or excessive engine heating. ????

The 12V RS550VC motor is often chosen by DIY enthusiasts who repair or build:

• simple electric vehicles and toys,
• drives for amateur models and mechanisms,
• rotating and sliding systems,
• small technical devices with gears.

This is a good choice when you need a classic brushed motor for everyday use, without complicated control electronics.

• Don't choose a motor solely based on the appearance of the housing.
• Check the compatibility of the sprocket with the existing mechanism.
• Do not exceed the rated voltage for the motor.
• If you are replacing a part in a toy or vehicle, also check the condition of the gears and wiring.

In many cases, it's not the engine itself that's causing the problem, but a worn gearbox, mechanical play, or poor power connections. ????

Yes, but only if the voltage of 12V, the motor format and 9-tooth gear and the way of cooperation with the gearbox are correct.

Yes, it is a brushed DC motor, designed for DC power.

Most often for electric toys, simple drives, DIY projects, mechanisms and devices requiring higher torque.

The motor is designed to operate at 12V DC.

Because it affects the interaction with the transmission. If the sprocket is not compatible with the mechanism, assembly may be impossible or the drive may not function properly.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.