Brushed DC Motor 16.8V - RS550VC - 12 Teeth - High Torque

This RS550VC brushed DC motor is a practical choice for applications requiring high torque, reliable starting under load, and compatibility with a 12-tooth gear. It works well as a drive element or replacement part in 16.8 V DC powered devices.

This solution is often chosen for power tools, models, vehicles, and various DIY mechanisms where the motor itself must cope with greater resistance at startup.

If you're looking for a motor for a device that needs to not only rotate but also transmit power, this model is worth considering. Its brush design and torque-oriented characteristics make it suitable for heavy-duty applications, not just for light, fast drives.

• power tools – as a spare part after checking the compliance of dimensions and mounting,
• vehicles and models – where starting under load is important,
• DIY projects – own drives, working mechanisms, gear systems,
• workshop equipment – as an engine for mechanisms requiring driving force.

???? This is a good direction, especially if the old engine had problems starting, overheated or did not work properly with the gearbox.

• RS550VC brushed DC motor,
• nominal power supply 16.8 V,
• 12-tooth sprocket,
• the nature of work is focused on high torque,
• can be used as a spare part after verification of compliance.

With this type of product, the model name alone isn't enough. To avoid making a mistake, compare several components before installation.

• Power supply voltage: the device should operate with a 16.8 V DC motor.
• Engine Type: Compatible with RS550VC or suitable design equivalent.
• Number of teeth: This variant has 12 teeth, so it must fit into the existing gear.
• Mounting dimensions: check housing, mounting points and engine space.
• Connection method: compare the terminals and the mounting arrangement in the device.

???? The most common mistake is selecting a motor based solely on voltage. In practice, the gearing, housing, and mounting method are equally important.

This type of engine is most often used for repairs or equipment upgrades. Therefore, before replacing it, it's worth performing a quick inspection:

• compare the old and new engine visually,
• check the number of teeth on the sprocket,
• make sure that the power supply in the device corresponds to 16.8 V,
• verify that the housing and mounting do not require modifications,
• Before full load, perform a short test run.

✅ This inspection helps avoid problems with gear noise, excessive tooth wear or lack of proper meshing.

In engines that are paired with a gear, the number of teeth isn't a detail—it's one of the key parameters of fit. This model has a 12-tooth sprocket, so it should work with a mechanism designed specifically for this configuration.

If the number of teeth doesn't match, it can cause assembly problems, improper meshing, or accelerated gear wear. Therefore, when comparing replacement parts, it's worth comparing not only the model but also the gear itself. ????

The brushed DC motor is a classic and widely used solution. For the user, this means a simple operating principle, wide application range, and easier adaptation to many work and workshop equipment.

In practice, this type of motor works well where direct DC drive and reliable mechanism operation are required. This solution is often found in power tools and consumer appliances. ????

• Match the motor to the entire system, not just the voltage.
• When replacing parts, also compare the gear and mounting method.
• After assembly, run the device without a heavy load and check its operation.
• If the drive is noisy, check the gear alignment and meshing.

Yes, it is designed for a 16.8V DC power supply.

Yes, this variant comes with a 12-tooth sprocket.

This depends on several parameters: engine model, voltage, number of teeth, dimensions, and installation method. It's worth comparing the new part with the old one before purchasing.

Most often for power tools, vehicles, models, working mechanisms and DIY projects where a more powerful drive and good starting under load are needed.

Choose this motor if you're looking for a 16.8V brushed DC motor with a 12-tooth gear and need more torque for your equipment under load. It's a smart choice for repairs, drive replacements, and workshop projects, provided you check mechanical and electrical compatibility first.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.