Sort By:
Show:
Open linear bearing ISKRA PLB30OP
Open linear bearing ISKRA PLB30OP
ISKRA Zakład Maszyn i Łożysk Specjalnych
B1 [mm]: 1.85 Inner diameter [mm]: 30 Outer diameter [mm]: 45 D1 [mm]: 44.5 Length [mm]: 64 Dynamic load capacity [kN]: 2.82 Static load capacity [kN]: 2.23 In..
90.00€
6-11 business days
Bearing block BK17 C7 drive side
Bearing block BK17 C7 drive side
Sonyung Industry Co.
Characteristics : BK17 bearing block mounted on the drive side of the screw Two angular contact bearings with an internal diameter of 17 mm are used The bearin..
89.30€
6-11 business days
Ball screw with nut SFU2505 400mm with machining for bearing blocks
The high-quality ball screw and nut have rounded ends that enable installation in typical size 15 bearing blocks. Ball screw with an outer diameter of 25 mm an..
88.80€
6-11 business days
Trapezoidal screw 60x9 490mm
Diameter (dxP): 60 x 9 mmDiameter (d2): 54.935 mm Core Diameter (d3): 48.15 mm Accuracy: 200 μm/300mm Straightness: 0.3 mm/300mm Thread Direction: Right-hand th..
88.80€
6-11 business days
Brown trapezoidal nut with collar, reduced 10x3, right hand
Length (L): 30 mm Flange diameter (d3): 45 mm Hole diameter (d4): 5.5 mm Thread diameter (d2): 32 mm Thickness (s): 10 mm Trapezoidal screw specification (dxP):..
88.80€
6-11 business days
Linear bearing with square flange LMK50UU-L
Height (H): 13 mm Shaft Diameter (d1): 9 mm Hole Diameter (d2): 14 mm Height (h): 8.6 mm Center Height (C): 92 mm Center-to-Center Diameter (PCD): 98 mm Dynamic..
87.80€
6-11 business days
Linear shaft end support TA-40
Radius (R): 122 mm Length (A): 230 mm Height (H1): 72 mm Width (B): 30 mm Shaft Diameter (d): 40 mm Distance from Shaft Center to Bottom (E): 190 mm Mounting Sc..
88.30€
6-11 business days
HIWIN HGH20HA-Z0 linear carriage
Length (L): 92.2 mm Height (H): 30 mm Width (B): 32 mm Mounting Hole Spacing (C): 50 mm Rail Width (In): 44 mm Mounting Screws: M5x6 Dynamic Load Capacity (Cdyn..
87.20€
6-11 business days
HIWIN HGL30CA-Z0 linear carriage
Length (L): 97.4 mm Height (H): 42 mm Width (B): 40 mm Mounting Hole Spacing (C): 40 mm Rail Width (In): 60 mm Mounting Screws: M8x10 Dynamic Load Capacity (Cdy..
86.60€
6-11 business days
Multi-coil nut DST-JFRM-2525DS10x50
Diameter d1 [mm]: 10 Diameter d3 [mm]: 42 Diameter d4 [mm]: 34 Diameter d2 [mm]: 25 Length b1 [mm]: 25 Thread: Ds10x50 Diameter d5 [mm]: 5 Length b2 [mm]: 10 St..
86.80€
6-11 business days
Linear shaft with support PW25 - 2000mm
Linear shaft with support PW25 - 2000 mm Width (B): 55 mm Flange Height (F): 21 mm Height (h): 33 mm Support Base Width (C): 35 mm Support Base Height (E): 27.5..
87.10€
6-11 business days
Showing 941 to 960 of 2065 (104 Pages)