Digital Oscilloscope Kit DSO150 15001K With Case

DSO Shell has similar bandwitch as DSO138 though it contains significant improvements in structure, mechanical, and operation. Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers. Feedback from DSO138 usres have shown that soldering on the pin-headers are often problematic for many beginners. Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard is actually a general purpose control board that can be used in many other applications. The mainboard is fully installed (except a few through-hold components) and factory tested before packing. DSO Shell comes with full enclosure. The front panel and top/bottom brackets are flexiable for easy user modification. Rotary encoder has been added. It makes parameter adjustment much quicker and easier. The sensitivity of DSO Shell has been extended in both directions and is higher and wider than DSO138. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.
DSO Shell runs on 9V (do not use power voltage higher than 10V!) power supply. Users need to prepare their own power supply since it is not included in the kits. The power jack on the mainboard accepts standare 5.5mm/2.1mm DC plug. Alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources.

Important Notes:
It is assumed that users have adaquate soldering skills and troubleshooting skills to assemble the DSO Shell kits. Buyers are advised that due to skills of user is involved in assembly it is not guaranteed every kit will end up being a working device. But we will make as much efforts as we can to approach that goal.
After receiving the kits users are urged to check mainboard and LCD by applying proper power supply. Report immediately to us or JYE Tech if problem or damage is found.

Characteristics of indicators:

• Number of channels: 1
• Analog bandwidth: 0 - 200KHz
• Sensitivity: 5mV/Div - 20V/Div
• Sensitivity error: < 5%
• Resolution: 12-bit
• Input Impedance: 1M ohm
• Maximum input voltage: 50Vpk
• Coupling: DC, AC, GND
• Max real-time sampling rate: 1Msps
• Timebase: 10us/Div - 500s/Div
• Record length: 1024
• Trigger modes: Auto, Normal, Single
• Trigger types: Rising/falling edge
• Trigger position: 1/2 of buffer size fixed
• 2.4-inch color TFT LCD with 320 x 240 resolution
• Power supply: 9V DC (please make sure the power supply is 9V, lower or higher than 9V will cause problems.)
• Supply current: 120mA @ 9V
• Dimension: 115mm x 75mm x 22mm
• Weight: 100 gram (not including cables and power supply)

• Firmwares: Click to open
• Users Manual: Click to open
• Mainboard Schematic: Click to open
• Analog board Schematic: Click to open
• How to Use the DSO150 Library: Click to open
• Source codes: Click to open
• FAQ, Tips, and Troubleshooting: Click to open

• 1 x DIY DSO150 Digital Oscilloscope Kit (There may be a color difference)
• 1 x EN Instruction

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-2 w.d.) price for items of any size is through through courier service is 4.50€ (incl. VAT). 

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.50€ incl. VAT.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.50€ incl. VAT.

Payment on delivery +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

other - negiotiated individually.

International delivery pricing to Omniva parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.

Paid orders of more than 100€ are shipped for free to Baltic countries.

Product availability status meaning:

Vilnius Store In Stock - the product is at the store, Vytenio str. 20 in Vilnius and can be picked up / purchased the same day;

Kaunas Store In Stock - the product is at the store, Pramonės pr. 4D in Kaunas and can be picked up / purchased the same day;

Central Warehouse In Stock - In stock, product will be shipped in a short time 1-2 work days, there is no possibility to pickup on the spot;

1-2 work days - product will be shipped in a short time - 1-2 business days;

1-2 work days – we don’t have selected product in stock. Shipping time is only 1-2 work days;

3-5 work days – we don’t have selected product in stock. Shipping time is between 3-5 work days;

3-7 work days – we don’t have selected product in stock. Shipping time is between 3-7 work days;

Out of Stock – selected product is sold out at the moment, but you can apply for automatic alert by email when product will be in stock.