Female cable with Micro-JST-2.0 2PIN socket - 2.00mm pitch - 10cm

This short cable terminates with a female Micro-JST 2.0 2-PIN connector with a 2.00 mm pitch. It's perfect for applications where standard plugs are too large and a quick and reliable power connection or simple signal to a small electronic module is needed.

If you're building a DIY system, repairing electronics, or want to make a convenient connection to a sensor, board, or small device, this cable allows you to avoid makeshift connections and makes assembly easier.

• For powering small modules – e.g. boards, sensors and simple electronic circuits.
• For repairs and service – when a damaged cable end needs to be replaced.
• For DIY projects – Arduino, ESP32, ESP8266, Raspberry Pi and hobby electronics.
• For connections inside the housing – 10 cm length makes it easier to run the cable in a small space.

This is a good choice when you want a short cable length and a connector that doesn't take up much space.

• Connector type: Micro-JST 2.0, female
• Number of pins: 2PIN
• Pitch: 2.00 mm
• Cable length: 10 cm
• Core colors: red and black

The most important thing about this product is connector compatibility. Micro-JST 2.0 is not the same as larger JST connectors with a different pitch, so it's worth comparing the plug with the socket in your device before purchasing.

The cable is suitable for devices and modules equipped with a 2-pin Micro-JST 2.0 connector. In practice, it is used in small power systems and signal connections where small connector size is important.

It matches if they agree at the same time:

• connector type: Micro-JST,
• number of pins: 2,
• raster: 2.00 mm.

Don't assume compatibility based solely on appearance. In electronics, similar plugs often differ in housing details and pin spacing.

The 10 cm length is ideal for use inside devices, in compact designs, and where you don't want to leave excess cable. A shorter cable is more convenient for tidy installation and reduces clutter in the case.

If you're looking for a cable to connect distant components, it's worth checking beforehand whether 10 cm will be sufficient. This product is more for short runs than for freely running cables over longer distances.

• Before connecting, check the polarity of the wires and compliance with the device pins.
• Make sure the voltage and connection method match the requirements of the module or board.
• Do not pull on the cable itself when disconnecting – grasp it as close to the connector housing as possible.
• Do not bend the cable sharply at the connector itself, as this is the place most susceptible to damage.
• Avoid working in high humidity and elevated temperatures.

• Confusing Micro-JST 2.0 with another JST connector of similar appearance.
• No check to see if a female connector is needed and not a male one.
• Assuming that the length from the description is 30 cm – in this variant the cable is 10 cm.
• Purchase without checking the pinout and connection direction in the device.

Not directly compatible with every board. Compatible with modules and accessories that have a Micro-JST 2.0 2-pin connector. Compatibility must be verified with the specific device.

Yes, it can be used to power small modules, but also for simple signal connections if the connector and pinout match.

Compare the housing type, pin count, and 2.00 mm pitch. If in doubt, it's best to measure the pin spacing on your device.

Yes, the product is described as a cable terminated on one end with a Micro-JST socket.

It's a small component, but very useful when assembling and repairing electronics. Instead of soldering a connector from scratch, you can prepare the connection faster, keep your wiring tidy, and reduce the risk of errors when connecting small modules.

If you need a 10cm Micro-JST 2.0 2PIN female cable for power, a sensor, or a compact DIY project, this variant will be a good solution for short connections inside your device.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.