FNIRSI 1013D 7" portable tablet oscilloscope

Brand: FNIRSI
Product Code: 1013D
Availability: 4-6 business days
Planuojama gavimo data po užsakymo: 2026-09-08

172.10€
Ex Tax: 142.23€

Qty

Add to Wish List

The FNIRSI 1013D portable oscilloscope with a 7-inch touch screen, 2 measurement channels, 100 MHz bandwidth and 1 GSa/s sampling rate allows you to accurately analyze signals in service, workshop and electronic device design. The device is equipped with an easy-to-read 800x480 TFT display, automatic one-button signal adjustment and waveform recording function, allowing you to conveniently and quickly perform measurements anywhere. Support for analog and digital signal analysis allows you to use it for equipment service and DIY purposes. The built-in 6000 mAh lithium battery allows the device to operate for about 4 hours.

Clear touch screen

The FNIRSI 1013D has a 7-inch TFT LCD screen with 800x480 resolution, ensuring high brightness, contrast and accurate waveform reproduction. Touch screen control allows you to quickly zoom, pan and change measurement parameters, speeding up work without using physical buttons. The screen is made using capacitive technology known from modern smartphones, which ensures smooth operation and no delays when changing settings. The cursor measurement function allows... Accurate reading of signal amplitude, period and frequency without the need to convert units from the screen grid, which is especially useful with distorted signals or rectangular waveforms with noise.

Two measurement channels

The device has two measurement channels with an input impedance of 1 MΩ, which allow you to analyze two signals simultaneously, making it easier to compare the input and output of amplifier circuits, converters or analyze a PWM signal. This allows you to make the scope of application much wider than with single-channel models. You can also perform Lissajous pattern analysis in XY mode, which allows you to determine the frequency, amplitude and phase shift between two signal groups.

Automatic Signal Adjustment

One-button automatic adjustment function allows you to instantly adjust the signal measurement parameters without manual calibration. As a result, the FNIRSI 1013D can adjust the signal settings of 1 Vpp within 1 second, saving time and increasing work efficiency. The built-in fuzzy logic algorithm ensures high accuracy and automatically moves the signal to the center of the screen, making analysis much easier.

Damage Protection

The oscilloscope uses built-in Surge Protection Modules up to 400 V to protect the device from accidental damage when measuring high-voltage signals, even if the probe is not set to 10X mode. This allows you to safely test power and high-voltage circuits.

Data Storage and Export

The FNIRSI 1013D offers 1 GB of internal memory, where you can store up to 1000 images and 1000 waveform sets. This allows you to quickly save measurement results with one click and export them via USB to a computer for further analysis. The waveform manager function allows you to view thumbnails of stored waveforms, zoom in, delete and analyze them with a cursor right on the device - similar to a smartphone gallery, making data management more convenient.

Advanced trigger functions

The oscilloscope offers a full set of trigger modes - automatic, single and normal. This layout allows you to test sudden pulse ignition signals, IR remote control signals or sinusoidal signals, depending on the selected mode, making the device a versatile diagnostic tool. You can also set the trigger edge (rising/falling) and trigger channel, allowing you to precisely capture the signal fragments you are interested in.

Specifications:

Manufacturer: FNIRSI
Number of channels: 2
LCD screen size: 7 inches
LCD resolution: 800 x 480
Screen technology: TFT
Frequency width: 100 MHz
Sampling rate: 1 GSa/s
Highest test voltage:
1X: 40V
10X: 400V
Cursor: XY position
Trigger: Y
Rotation mode: Supported
One-button automatic setting: Supported
Waveform storage: 1000 images + 1000 waveforms
Waveform driver: Supported
Voltage accuracy: ± 2%
Rise time: < 3ns
Memory depth: 240 Kbit
Input impedance: 1 MΩ
Sensitivity: 50mV ~ 500V
Time base: 50s ~ 10ns
Trigger Mode: Single / Normal / Auto
Trigger Edge: Rising / Falling
Coupling: AC / DC
Frequency Accuracy: ±0.01%
Parameters: 12 types in total
Battery: Lithium with a capacity of 6000 mAh
Operating time: 4 hours
Extension: USB export
Charging: USB-C 5V 2A/3A/4A
Dimensions: 184x124x50mm

Tags: fnirsi, 1013d, portable, tablet, oscilloscope, oscilloscopes

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.