Home Assistant Yellow Standard Kit - intelligent control unit - ZigBee / Thread - Nabu Casa YELLOW-KIT-STD

Brand: Nabu Casa
Product Code: AN-24698
Availability: Temporarily Out Of Stock

181.40€
Ex Tax: 149.92€

Qty

A smart control unit that allows you to create your own home automation system based on the Home Assistant platform. The device allows you to easily integrate thousands of devices in one place. Home Assistant Yellow has a built-in ZigBee and Thread chip, allowing you to add almost any device that supports these standards to your smart home system. The control panel requires a Raspberry Pi Compute Module 4 / Compute Module 5 for proper operation.

Specifications:

Model: YELLOW-KIT-STD
Chipset: None (Raspberry Pi CM4 / CM5 required)
Ethernet: Gigabit Ethernet IEEE 1588
Multi-protocol wireless chip: SiLabs MGM210P (MGM210PA32JIA2)
Supported protocols:
ZigBee 3.0
Thread
Wireless chip:
32-bit ARM Cortex-M33 with DSP
80 MHz
1024 KB program memory
96 KB RAM data memory
Radio:
2405 MHz - 2480 MHz
Transmitter power up to +20 dBm
Integrated antenna with 1.86 dBi gain
Sensitivity: 103.9 dBm (1% PER) at 250 kbps O-QPSK DSSS
M.2 Key M slot:
Supports 2230 / 2242 / 2260 / 2280 modules
1x PCIe
USB:
2x USB 2.0 Type-A, 5V / 1.5A
1x USB-C, supports USB 2.0 / 1.1, consumes less than 100 mA at 5V
Default USB-serial port decoupling
Can be connected to USB 2.0 CM4 for USB boot (playback)
High-quality stereo audio DAC:
2V RMS line output, 3.5mm audio jack
Impedance 10kΩ (minimum 5kΩ)
SNR 104 dB
Dynamic range 106 dB
RTC: CR2032 battery
GPIO pins:
2x 5-pin J11, compatible with the first 10 pins 1 to 10 of the 40-pin Raspberry Pi connector
Serial port available by default, I2C via boot configuration option
Status LEDs (software controlled):
Red (CM4 power LED)
Green (CM4 activity LED)
Yellow (CM4 status LED)
Blue (MGM210P activity LED)
Power supply:
12V DC / 2.5A (IEC 60130-10 Type A 5.5mm outer diameter, 2.1mm inner diameter)
Typical power consumption:
Idle mode: approx. 1.5W
Idle mode with NVMe: approx. 2W
Load: 5W to 9W
Housing: transparent polycarbonate
Dimensions: 124x124x35mm
Weight: 270g (with heat sink)

In the kit:

Yellow Home Assistant kit
Power supply
Red element with heat pads
Ethernet cable
Quick start guide

Tags: home, assistant, yellow, standard, kit, intelligent, control, unit, zigbee, thread, nabu, casa, yellow-kit-std, smart, devices

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.