Newton's Pendulum 5 Balls - DIY - Wooden Educational Toy

This isn't just a toy you'd put on a shelf. This DIY Newtonian Pendulum demonstrates how energy and momentum transfer work when balls collide. Children first assemble the model and then immediately see the laws of physics at work.

This is a good choice if you're looking for a wooden educational toy that combines tinkering, learning, and observing the mechanics of motion. This 5-ball model is perfect for home, school, engineering labs, and STEM classes.

Newton's pendulum helps us understand phenomena that are sometimes abstract in books. By swinging one ball and releasing it, we see how energy passes through the middle balls and causes the ball on the opposite side to swing.

• ✅ shows the principle of conservation of energy
• ✅ makes it easier to understand the conservation of momentum
• ✅ illustrates the elastic collision of balls
• ✅ encourages your child to ask questions and experiment
• ✅ develops patience and accuracy when folding

In a finished pendulum, only the effect is visible. In the DIY version, the child walks through the entire process: from the structural elements, through frame assembly, to hanging the balls. This makes it easier to understand that proper operation depends on the geometry, cable tension, and even alignment of the components.

This practical combination of an educational toy and a simple, self-assembly model makes a great first construction set for children interested in technology, physics, or wooden models.

The mechanism of action is simple to demonstrate, but very educationally valuable:

• you tilt one extreme ball,
• you let her go freely,
• the ball hits the others,
• energy and momentum are transferred through the central balls,
• the ball on the opposite side swings out.

Thanks to the 5 balls, the effect is clear and easy to observe, even for younger children. This is a good model for first experiments with dynamics.

• Learning by doing – the child builds and tests the model himself.
• Development of manual skills – folding requires precision and quiet work.
• Concentration exercise – it is important to correctly match the parts and lines.
• Logical thinking – the child observes cause and effect.
• Interest in physics – easier to understand motion, energy and collisions.

• at home as an educational toy and a simple physics experiment,
• at school as an aid to presenting the basics of mechanics,
• in technical and STEM classes,
• as a gift for a child who likes to assemble DIY models,
• on the desk of a young designer as a working demonstration model.

This product is for those who want to assemble the model themselves. If you're looking for a ready-made pendulum that's ready to use right out of the box, this option may not be for you.

• ???? the set requires assembly,
• ????️ correct operation depends on careful assembly,
• ???? the lines and balls should be aligned,
• ???? the model works best when placed stably on a flat surface.

This is especially important when purchasing a product for a younger child – adult assistance may be needed when assembling it.

When assembling, it's important to approach the model as a small technical structure, rather than as a simple toy. This improves the final result.

• arrange all the elements before starting assembly,
• check that the frame is straight and not tilted,
• make sure the balls hang at approximately the same height,
• do not twist or tangle the lines,
• Test the operation only after the entire setup is stable.

• balls too loosely or unevenly attached,
• placing the model on a soft or uneven surface,
• deflecting several balls too strongly at once during the first test,
• imprecise fit of the wooden structure.

This is a DIY version, i.e. a model for self-assembly.

Primarily, it shows the transfer of energy, conservation of momentum, cause-effect relationships, and the basics of mechanics.

It's both. It works well as an educational toy, but also as a simple demonstration model for learning physics.

The even suspension of the balls, the stability of the frame, and the precise fit of the components directly impact the operation of the pendulum.

If you're looking for a DIY wooden model that not only keeps your hands busy but also truly teaches you the basics of physics, this 5-ball Newtonian pendulum is a smart choice. It teaches through observation, requires precision during assembly, and produces clear results without complicated operation.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.