PrimaCreator MK8 Ruby Nozzle 0.8mm - 1 pcs

MK8 Nozzle with Ruby - 0,8 mm. Compatible with: Creality CR-10 series, Ender 3, Ender 5, MakerBot Replicator 2, CraftBot series.
The PrimaCreator Ruby Nozzle is the latest addition to the range of PrimaCreator nozzles.
A regular brass nozzle is most often recommended as they have superior conductivity when it comes to heat. But a brass nozzle has its drawbacks. If you want to print with an abrasive material like carbon or glow in the dark filament a regular brass nozzle will wear out in a very short time. This is why you can choose to use a hardened steel nozzle, it will not wear out as quick as a brass nozzle but it´s made of steel and as a material, it´s not optimized for being used as an everyday nozzle due to the fact that the heat conductivity isn´t as good as in a brass nozzle.
In the best nozzle we ever produced we have the same high-quality brass as in our regular nozzles but in addition to this, we have also added a small ruby gemstone at the tip of the nozzle. This transforms a regular brass nozzle to a nozzle you can use with your standard filament like PLA, ABS, PETG and so on to the more abrasive ones like carbon filled filament, metal, glow in the dark, wood, well, most types of nozzle killer filament you can think about that are currently on the market.
All ruby nozzles from PrimaCreator are made from the best high-quality brass with a ruby tip. They are completed in a state-of-the-art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.
For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a Prima Creator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.
The process of making a Prima Creator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that is going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process, this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The ruby nozzle from PrimaCreator is the perfect choice for people who only wants the best and at a great value!

Main features:

• All filaments, one nozzle
• Extreme durability
• Perfect for very abrasive filaments like carbon, glow in the dark, glass fiber, metal, wood
• Perfect diameter without jagged edges equals better print quality