Sort By:
Show:
Two fans 5V with 50x25mm heat sink
Two fans operating at 5 V. The set has a 2-pin connector with a 2,54 mm grid. A heat sink with thermally conductive tape is mounted to the fans. Dimensions of f..
10.60€
4-7 business days
OnOff SHIM, on/off switch, overlay for Raspberry Pi
OnOff SHIM is a shield for the Raspberry Pi, mounted on the GPIO connectors. After disconnecting the power supply to the microUSB port on the shield and pressin..
11.00€
4-7 business days
Housing for the IR-CUT camera - closed - transparent
Transparent, closed case for Camera HD IR-CUT with dimensions of 89 x 45 x 32 mm...
10.90€
4-7 business days
M40160M12 M12 mount lens 1.6mm, for ArduCam cameras, ArduCam LN018
Lens for cameras with M12 mounting. M40160M12 has 1.6 mm focal length and 1/4" format. The viewing angle for 1/4" format is 118° using the camera for Raspberry ..
11.30€
4-7 business days
Goldpin set of 2x20 pins with fastening tools - without soldering
A set of 40 strips that do not require soldering. Used Raspberry Pi 3/2 / B + / Zero / Zero W. Spacing 2.54mm. The kit includes a special device for mounting th..
10.30€
4-7 business days
u.FL WiFi Raspberry Pi antenna, for Raspberry Pi CM4
SMA antenna with SMA - u.FL adapter for Raspberry Pi Compute Module 4. A set is compatible only with Raspberry Pi in the CM4 version, which is equipped with u.F..
10.30€
4-7 business days
MicroHDMI - HDMI cable 1m Black
MicroHDMI - HDMI cable is used to connect the RPi 4 minicomputer to the monitor. Black model. The cable length is 1m.Specification:Transmission of video and aud..
10.30€
4-7 business days
Raspberry Pi Model 4B official body - graphite
The official Raspberry Pi case has the ability to configure items.          Graphite color    &..
10.30€
4-7 business days
Case for Waveshare LCD Screen HDMI 7" Black And White
Two-tone case for Raspberry Pi touch screen LCD TFT 7" from Waveshare. Kit contains the elements that allow you to set the screen at an angle of 45 ° or 60 °. S..
11.30€
4-7 business days
RGB LED Hat - Raspberry Pi 3/2/Zero Shield
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.FeaturesSupports any revisi..
10.70€
4-7 business days
Raspberry Pi Prototyping Shield - THT 26pin
Raspberry Pi prototyping shield. Screw connections allow for reliable connection of high power wires, F-type sockets for quick prototyping, and free solder pads..
10.50€
4-7 business days
Power supply T6716DV 5.1V 2.5A - microUSB for Raspberry Pi 3/3+
Output voltage: 5,1 V DC. Output current: 2.5 A. MicroUSB connector. Power supply for Raspberry Pi 3/3+Specifications:       Outpu..
10.80€
4-7 business days
MCP4725 DAC Converter I2C - SparkFun
SpecificationPower supply from 2.7 to 5.5 voltsResolution: 12 bitInterface: I2CIntegrated I2C resistors with the option to disconnect them by separating the cov..
10.40€
4-7 business days
ProtoMate Universal Printed Circuit Board for Raspberry Pi 3B/4B/5/Zero 2 - PiHut 106569
ProtoMate is an innovative prototyping board in a HAT format, designed for users who want to transition their designs from breadboard to a permanent, soldered ..
9.70€
4-7 business days
Raspberry Pi Pico 2 H - RP2350 ARM Cortex M33 - with
connectors The Raspberry Pi Pico 2 H is a modern microcontroller based on the RP2350 chip, clocked at 150 MHz. Equipped with 520 KB of SRAM, 4 MB of QSPI Flash..
9.40€
4-7 business days
Case for Raspberry Pi 5 and Raspberry Pi Touch Display 2 7'' - Waveshare 31510
The case was designed specifically for the Raspberry Pi 5 and Touch Display 2 7", offering a convenient and secure solution for their integrated mounting. Made..
9.40€
4-7 business days
Beetle RP2350 - Development Board with RP2350 Microcontroller - DFRobot - DFR1188
Beetle RP2350 is an extremely small but very powerful programmable board for developers of embedded projects and IoT applications. Built on the basis of the Ra..
9.80€
4-7 business days
PiCowBell Proto Under Plate - Protoboard for Raspberry Pi Pico - STEMMA QT - Reset Button - Adafruit 5905
Adafruit PiCowBell Proto Under Plate is a compact board designed for prototyping with Raspberry Pi Pico. It has dual 2x 20 pin sockets that allow easy connecti..
10.10€
4-7 business days
OV5647 5Mpx wide-angle camera - fisheye 62 FOV for Raspberry Pi 3B, 3B+, 4B - Seeedstudio 114110127
Camera module compatible with Raspberry Pi version 3B, 3B+, 4B, equipped with high quality OV5647 sensor allowing to record video in 1080p quality (at 30 fps) ..
9.90€
4-7 business days
Showing 601 to 620 of 1014 (51 Pages)

Raspberry Pi is a microcomputer manufacturer in the United Kingdom that aims to promote computer training in programming schools in developing countries. At the same time, this type of computer is a very great educational tool that is suitable for children interested in robotics and computer science. Raspberry pi has gained much more popularity than expected and its products are currently mostly used in the field of robotics. Why? A small computer, barely the size of a bank card, can perform exactly the same processes as a large stationary device. It is because of its power and simplicity that the Raspberry pi has become particularly popular around the world.

  • The biggest advantage of a microcomputer is size. It's easy to transport from one place to another.

  • The computer doesn't heat up at all, so it can run 24 hours a day, 7 days a week.

  • The computer is easy to adapt to a variety of projects and becomes a great learning tool.

A compact, functional computer will be much more useful if you purchase special accessories with it: a screen, mouse, or keyboard. In that case, for a minimal amount of money, you'll have a regular computer that's great as an educational tool for kids and those who have recently become interested in programming.

Raspberry pi is a great learning tool to help you become better acquainted with programming and robotics tools. The price of a computer and its accessories is low, and the functionality is incomprehensible. Although the computers of this manufacturer have been on the market for only a few years, but have reached the whole world. It is a tool that has inspired and inspired the younger generation to become more interested in programming, especially the Raspberry pi customization possibilities, which are limitless.