Smart Power Meter Shelly Mini PM Gen3

Open full screen imageOpen

• Device name: Shelly PM Mini Gen3

• Device model: S3PM-001PCEU16

• Device SSID: ShellyPMMiniG3-XXXXXX

• BLE Model ID: 0x1023

Shelly PM Mini Gen3 is a small form factor power meter. Improved in all aspects of the gen2 software flexibility, it provides professional integrators with additional options for end-user solutions. It can operate standalone on a local Wi-Fi network or can be controlled via cloud home automation services using MQTT, HTTP and WebSocket. All incoming connections support TLS. The device is an improved version of the Shelly Plus PM Mini with a more advanced processor and larger memory.

The user can access, configure and monitor the Shelly PM Mini Gen3 remotely, and the device can also access and communicate with the automation system if they are on the same network infrastructure.

The device has a built-in web interface that allows you to monitor and control the device, as well as adjust its settings.

• Power Meter: Designed as a small-format power meter that allows you to monitor the power consumption of connected devices.

• Greater software flexibility: Inheriting the flexibility of generation 2 software, professional integrators have additional options for creating end-customer solutions.

• Compact size: PM Mini Gen3 can be connected in very small spaces inaccessible to other devices.

• Improved processor and memory: Improved processor and increased memory for better performance.

  ³

"

Continuous access: The user can access, configure and monitor remotely, as well as communicate with the automation system on the same network infrastructure.

Embedded web interface: Has an embedded web interface for monitoring, control, and adjusting settings.

BLE Gateway: The hardware that connects your Shelly BLU devices to the wider Shelly ecosystem. It receives Bluetooth signals and sends them to the cloud or locally to another non-Bluetooth device.

WiFi Range Extender for IoT Devices: A WiFi extender is used to extend the coverage of a WiFi network by taking an existing WiFi signal, amplifying its strength, and then transmitting the amplified signal over a larger area.

Difference: https://shelly-api-docs.shelly.cloud/gen2/Scripts/ShellyScriptLanguageFeatures/

Wide range of integrations: The device can be integrated with third-party home systems, documented HTTP API, MQTT(s), web hooks over HTTP and HTTPS, UDP

• Energy consumption monitoring: The main purpose is to monitor the energy consumption of connected devices in real time. This information can be valuable in understanding energy consumption patterns and making informed decisions about reducing consumption.

• Optimize energy efficiency: Identify energy-intensive appliances and optimize their usage to improve overall energy efficiency at home or work.

• Device health check: Monitor the power usage of individual devices to assess their health and performance over time. Sudden spikes or changes in power consumption may indicate a problem with the device.

  .

• Cost management: By knowing your electricity consumption, you can estimate the operating costs of specific appliances and manage your electricity costs more effectively.

• Space-efficient: The device can be integrated into standard electrical wall boxes, behind sockets, light switches or other places where space is limited.

• Remote Monitoring: Like the Shelly 1PM Mini Gen3, the PM Mini Gen3 also supports remote access. This allows you to monitor your electricity consumption even when you are away from home.

Yes

Yes

Yes

Open full screen imageOpen

• 2 line inputs with screw terminals: 1 L and 1 N

• 2 load circuit outputs (internally bridged): 2 O

• Wi-Fi

• Bluetooth

• Internal temperature sensor and notification

• Resistive (incandescent bulbs, heating devices)

• Capacitors (LED drivers, capacitor banks, electronic equipment, motor start capacitors)

• Induction (transformers, fans, refrigerators, air conditioners)

• One (control) button

  • Press and hold for 5 seconds to turn on the device's hotspot and Bluetooth connection.

  • Press and hold for 10 seconds to reset the device to factory settings.

• LED (monochrome) indication

  • AP (access point) is on and Wi-Fi is off:
    1 second ON / 1 second OFF

  • Wi-Fi is on but not connected to a Wi-Fi network:
    1 second ĮJUNGTA / 3 seconds Išjungta

  • Connected to Wi-Fi network:
    Always ĮJUNGTA

  • Cloud enabled but not connected:
    1 second ĮJUNGTA / 5 seconds IŠJUNGTA

  • Connected to Shelly Cloud:
    Always ĮJUNGTA

  • OTA (Over the Air Update):
    ½ second ĮJUNGTA / ½ second IšJUNGTA

  • The button is pressed and held for 5 seconds:
    ½ second ĮJUNGTA / ½ second IšJUNGTA

  • Pressing and holding the button for 10 seconds:
    ¼ second ON / ¼ second OFF

The list provided starts with the device's initial state and lowest priority. Each subsequent state overrides the previous one.

Enlarges the table by opening it in a full-screen dialog boxOpen

Opens image in full screen Open

Enlarges the table by opening it in a full-screen dialog boxOpen

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.