Smart power supply unit Shelly Power Strip 4 Gen4

Smart power supply unit Shelly Power Strip 4 Gen4

Technical information:

Power supply: 220 - 240 V~ 50/60 Hz
Maximum switching voltage: 240 VAC
Humidity: 30% to 70% RH
Operating temperature: -20 °C to 40 °C
Product size: 43x237x56 mm
Weight: 560g

Specification:

Shelly Power Strip 4 Gen4 (hereinafter referred to as the Device) is a smart 4-socket/outlet device with individual power metering and overheat protection, allowing you to remotely control electrical appliances via a mobile phone, tablet, PC or home automation system. It can operate independently on a local Wi-Fi network or can be controlled via cloud home automation services.

The Shelly Power Strip Gen4 can be accessed, set up, and monitored remotely from any location where the user has an internet connection, as long as the device is connected to a Wi-Fi router and the internet.

The device has a built-in web interface that allows you to monitor and control the device and adjust its settings.

The device has a multi-protocol wireless MCU that provides Zigbee and Bluetooth connectivity, ensuring a secure connection.

This device is compatible with Matter.

• Next-generation Wi-Fi smart 4-plug strip with multi-color individual LED indicators

• Script

• Wi-Fi range extender

• BLE gateway

• Zigbee repeater

• Energy measurement at each plug

• Schedules

• High compatibility with third-party home automation systems

• Local actions

• Shellly Cloud / Shellly Smart Control app support (optional)

• Virtual components

• KNX network/IP support

• Use as a colored night light:
  Night mode with custom settings
  Night mode reduces the brightness of your Shelly Power Strip Gen4's LED indicator at night so you can sleep undisturbed at night.

• No forgotten devices:
  Monitor and easily control all your connected devices with just a few taps on your phone. With a built-in countdown timer and locally saved schedules, the Shelly Power Strip Gen4 can automatically turn off any forgotten devices after an hour, saving energy.
  Example: For example, an iron, smaller ovens, electric heating radiators

• Reduce energy waste by automating electrical appliances:
  Automate devices in your office that are not used at night or on weekends by simply adding the Shelly Power Strip Gen4. Now you can set smart schedules that will turn off the power to all unused electrical devices on weekdays from 7:00 PM to 7:00 AM and from 7:00 PM on Friday to 7:00 AM on Monday. This will cut the energy consumption of these devices by half, which will significantly optimize your monthly energy costs.
  Example: Use schedules to automate smaller ovens, electric radiators, and infrared heaters

• A water purifier that follows weather conditions:
  If you live in a big city, the air can be quite polluted, especially during the fall and winter seasons. Thanks to the Shelly Power Strip Gen4's scripting features, you can pull data directly from your air pollution monitor and set your old air purifier in your home to turn on when the air pollution levels outside increase.
  Example: Using scripts, you can automate an air purifier device and turn it on/off based on third-party data.

• Easily dimmable night light for children's comfort:
  Now you can set the color and glow level of your Shelly Power Strip Gen4's LED indicator and use it as a subtle light in your children's room at night.

• Living spaces

• MDU (Multi-family buildings - apartments, condominiums, hotels, etc.)

• Light commercial (small office buildings, small retail/restaurants/gas stations, etc.)

• Government and municipal institutions

• University/college

Yes

Yes

Yes

• 1 CEE 7/7 plug

• 4 CEE 7/3 (type F / Schuko) sockets

• Wi-Fi

• Bluetooth

• Zigbee

• Overheating protection

• Surge protection

• Surge protection

• Surge protection

• Resistive (incandescent bulbs, heating devices)

• Capacitors (capacitor batteries, electronic equipment, motor start capacitors)

• Inductive (LED drivers, transformers, fans, refrigerators, air conditioners)

• One button for each socket

  • Press to turn the output on/off.

  • Press and hold to turn off all 4 slots in the strip

• Press and hold the 1st and 4th bar buttons

  • 3 sec. check status (only available when outputs are off)

    .

  • Reboot within 5 seconds (Available up to 60 seconds after connecting the device to the mains/power source).

  • Restore factory settings within 10 seconds (possible up to 60 seconds after connecting the device to the mains/power source).

• Press the desired outlet control button 5 times in a row ???? → ???? → ???? → ???? → ????→ ???? :

  • To switch the device from Matter software (default) to Zigbee software

    .

• Press the desired socket control button 3 times in a row: ???? → ???? → ???? → ???? :

  • To enable Zigbee startup mode. This allows the Device to connect to the Zigbee network (pairing mode).

• LED indication

  • When connecting to the mains for the first time:

    • The blue light flashes to indicate access point mode.

  • After successfully connecting to the Wi-Fi network, pressing and holding buttons 1 and 4 for 3 seconds will turn the power back on/off:

    • The red light blinks slowly, indicating that the device is reconnecting to the Wi-Fi network.

    • A steady red light indicates that the Device cannot reconnect to the Wi-Fi network.

    • A slowly flashing yellow light indicates that the Device has reconnected to the Wi-Fi network, but is not connected to the Shelly Cloud.

    • A steady green light indicates that the device is reconnected to the Wi-Fi network and Shelly Cloud.

  • When the output is on:

    • Energy consumption is represented by a uniform color change (default value):

      • Green light when 0% power limit is set

      • Yellow light when 50% power limit is set

      • Red light when 100% power limit is set

      The user can select the brightness (default brightness is 100%).

    • Color can be selected (Default color - green, default brightness - 100%)

    • Off

  • When the output is off:

    • Off (default setting):

    • Selected color (default color - red, default brightness - 100%)

  • When an OTA update is in progress:

    • Red light is flashing

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.