Super Lube® O-ring silicone grease - 85 gr

Brand: Synco Chemical Corporation
Product Code: PRM-21717
Availability: 4-7 business days
Planuojama gavimo data po užsakymo: 2026-11-16
32.50€
Ex Tax: 26.86€

Qty

Super Lube O-Ring Silicone Grease 93003 - Lubrication and Sealing for O-Rings

Super Lube O-Ring Silicone Grease is a non-curing, heavy-consistency silicone compound formulated for the lubrication, sealing and conditioning of O-rings. It can also be used on compatible components in regulators, valves, pneumatic systems and vacuum equipment.

The 93003 version is supplied in an 85 g tube, providing a convenient format for maintenance, installation and assembly work.

Protects O-Rings During Installation

Applying the grease during installation helps reduce the risk of damage caused by abrasion, pinching or cutting. The lubricant also helps the O-ring seat correctly in its groove, which can simplify manual assembly and support automated assembly processes.

Before application, clean the mating surfaces and apply the grease evenly. Do not mix it with other greases.

Suitable for Static and Dynamic Applications

The grease is suitable for both static and dynamic O-rings. In dynamic pneumatic applications, correct lubrication can reduce friction and wear, helping to extend the service life of seals and equipment components.

Typical applications include pneumatic systems, valves, pressure plug valves, water softeners, faucet valves, pool pumps, filter seals, weather stripping and rubber gaskets.

Sealing Support for Vacuum Systems

In vacuum and chamber applications, the grease helps fill microscopic spaces between the seal and gland surfaces. This can reduce the overall leak rate by limiting permeation through the elastomer and improving the effectiveness of the seal.

Waterproof and Heat-Stable Formula

The silicone compound is waterproof, heat stable and resistant to water washout. It helps seal out moisture and protects compatible components against moisture and oxidation across a temperature range from -40°C to 260°C.

Its dielectric strength also makes it suitable for applications where electrically insulating properties are beneficial, provided the material and application requirements have been verified.

Food-Processing and Potable-Water Applications

Super Lube O-Ring Silicone Grease is NSF H1 registered for incidental food contact under registration number 156444. It is also described by the manufacturer as suitable for potable-water applications and is Kosher certified.

These properties make it suitable for compatible seals and components used in food-processing equipment, water systems and related maintenance applications.

Material Compatibility

The grease is compatible with most common plastics and elastomers, including ABS, PA, PC, PE, PET, PBT, PP, PTFE, PVC, EPDM, nitrile rubber, natural rubber, neoprene and FKM.

Important: The manufacturer rates compatibility with silicone rubber types FMQ, PMQ, MQ, VMFQ and VMQ as not compatible. Always verify the seal material before application and perform a suitability test when the material or operating conditions are uncertain.

Typical Applications
  • Static and dynamic O-rings
  • Pneumatic systems
  • Vacuum and chamber seals
  • Valves and pressure plug valves
  • Food-processing equipment
  • Water softener and faucet valves
  • Pool pumps and filter seals
  • Weather stripping
  • Rubber gaskets

Technical Specifications - Super Lube O-Ring Silicone Grease 93003
Product typeNon-curing silicone O-ring grease
Product number93003
Package85 g tube
NLGI grade2
ColourTranslucent white
Temperature range-40°C to 260°C
Base-oil viscosity at 25°C5000 cSt, ASTM D445
Specific gravity at 25°C1.11, ASTM D1298
Worked penetration, 60 strokes265-295, ASTM D217
Vapour pressure at 200°C1.33 Pa
Dielectric strength400 V/mil at a 50 mil gap, CTM 0114
Dielectric loss1.2 x 1012, ASTM D924
Oil separation, 21 hours at 100°C0%, ASTM D6184
Evaporation loss, 22 hours at 100°C0.4%, ASTM D972
Melting behaviourNo melt
Water washoutLess than 1%, ASTM D1264
Food-contact registrationNSF H1, registration number 156444
Important incompatibilityNot compatible with silicone rubber types FMQ, PMQ, MQ, VMFQ and VMQ


Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.