This short 2.4 GHz WiFi antenna is perfect for applications where compact size and convenient antenna alignment with the device's housing are important. Its angled SMA male connector makes it easier to mount in locations where a straight antenna might get in the way or protrude too far.
It is a practical choice for various network devices and modules operating in the 2400-2500 MHz band if they require an antenna with an SMA male connector and an impedance of 50 Ohm.
Why is it worth choosing this particular antenna? ✅- Short 5 cm housing – convenient for small devices and tight spaces
- 2.4 GHz band – for equipment operating in the 2400-2500 MHz range
- SMA male connector – important when selecting a compatible antenna
- Right angle – facilitates installation against a wall, in a cabinet or in a recess
- Gain 2.5 dBi – a parameter suitable for short utility antennas
- Vertical polarization – consistent with typical wireless device use
This solution is useful wherever a standard, longer antenna would be inconvenient. The short, angled antenna helps reduce the risk of snagging on cables, housing, walls, or other installation components.
- for routers, cards and WiFi modules with a suitable antenna socket
- for network devices mounted in cabinets and enclosures
- for DIY projects and consumer electronics
- for equipment that is placed close to a wall or in a hard-to-reach place
- for applications where compactness is more important than the large size of the antenna
The most common mistake with antennas is selecting the wrong connector. Before purchasing, make sure the device has a socket compatible with an SMA male antenna.
- Operating band: the device should operate in the 2.4 GHz range
- Connector: Needs to be fitted to SMA male
- Mounting arrangement: the angled version changes the way the antenna is positioned relative to the housing
- Impedance: The antenna is 50 Ohm, so it should work with equipment with the same impedance
???? If you're unsure, compare the connector type on your device with the product description and photo. In practice, the "SMA" designation alone isn't always sufficient – the male/female version and the mounting method also matter.
What to pay attention to when using? ⚙️This antenna is designed to operate in the 2.4 GHz band. Compatibility with other frequencies should not be assumed unless specifically stated in the device specifications.
When it comes to small antennas, it's worth remembering that their main advantage is ease of installation and space savings. They're a good choice for compact installations where simple assembly and hassle-free equipment setup are key.
Installation in practice ????️- turn off the device before mounting the antenna
- check that the thread and connector match
- screw in the antenna carefully, without using excessive force
- position the antenna so that it is not strained by the housing or cables
- After installation, check the stability of the connection and the operation of the device
???? The angled design helps where there is limited space at the back of the device or a straight antenna makes positioning the device difficult.
The most important technical parameters| Product type | WiFi antenna |
| Frequency range | 2400-2500 MHz |
| Antenna gain | 2.5 dBi |
| Length | 5 cm |
| Connector | Male SMA |
| Connector type | angular |
| Polarization | vertical |
| SWR | no more than 1.5 |
| Impedance | 50 Ohm |
| Maximum power | 50 W |
| Operating temperature | from -40 to 85 degrees C |
Yes, the antenna operates in the 2400-2500 MHz range, i.e. in the 2.4 GHz band.
Does the antenna have a straight or angled connector?This is the version with an angled SMA male connector, which makes installation easier in limited space.
Will this antenna fit any WiFi device?No. You need to check the connector type, operating range, and mechanical compatibility with the device.
When to choose a short antenna over a longer one?When the device operates in a tight space, is placed close to a wall or has a protruding antenna, it would be inconvenient in everyday use.
Claim orders from Stores
You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).
Please wait for an email notification regarding Your order status update.
Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva
Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva
Local delivery in Lithuania
Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.
Local delivery (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.
Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.
Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.
Payment on delivery (COD) +2.00€ (incl. VAT).
You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.
A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.
International delivery pricing through courier service
International shipping prices depend on geographic location:
Latvia - 5.50€ (incl. VAT)
Estonia - 6.50€ (incl. VAT)
Paid orders of more than 150€ are shipped for free to Latvia and Estonia.
other countries - negiotiated individually.
International delivery pricing to Omniva/Venipak parcel terminals
Latvia - 6.00€ (incl. VAT)
Estonia - 8.50€ (incl. VAT)
Payments:
We accept payments via PayPal for orders over 20€.





