Adafruit

Sort By:
Show:
PiCowbell Proto - prototype board for Raspberry Pi Pico - reset button - STEMMA QT - Adafruit 5200
PiCowbell Proto is an extension designed for Raspberry Pi in the Pico version, which enables prototyping of the module and allows you to create electronic circu..
5.80€
4-6 business days
DVI Breakout Board, Adapter with HDMI/DVI connector, for Raspberry Pi Pico, Adafruit 4984
DVI Breakout Board is a board equipped with an HDMI / DVI connector. It is an adapter designed for use with the Raspberry Pi in the Pico version in order to con..
5.80€
4-6 business days
Mini Oval Speaker 1W 8Ohm, 30x20x5mm, Adafruit 4227
A small loudspeaker with 1 W power and 8-ohm resistance. It is equipped with a 2-pin JST connector with a 1.25 mm pitch, so you can plug it directly into Adafru..
5.80€
4-6 business days
Needle sizes 3/9, set of 20pcs, Adafruit 615
Set of 20 pieces of needles with the size of 3/9, which allow the sewing of conductive threads. The kit includes needles of different lengths: from sizes 3 to 9..
5.80€
4-6 business days
TMP235, Analog Temperature Sensor STEMMA, Adafruit 4686
Adafruit Plug-and-Play analog temperature sensor with 3-pin STEMMA connector (JST connector). The module does not require the installation of additional drivers..
6.50€
4-6 business days
Module with a TRRS 3.5mm Jack connector - Adafruit 5764
The module from Adafruit was designed for easy and effective connection with TRRS audio cables, often used in headsets for mobile phones. The set of features o..
5.40€
4-6 business days
NeoKey Socket Breakout - module with slot for a mechanical switch - NeoPixel - Adafruit 5756
NeoKey Socket Breakout is a small PCB designed for Kailh CHOC switches, allowing easy connection to the breadboard. Includes a socket for CHOC switches, a 1N41..
5.40€
4-6 business days
NeoKey Socket - with a socket for mechanical key - NeoPixel - Adafruit 4978
NeoKey Socket - with Cherry MX compatible mechanical key slot. The NeoKey Socket board also has a built-in RGB NeoPixel diode, which illuminates the mounted but..
5.40€
4-6 business days
Stacking M2.5 Hardware Kit for STEMMA QT and RP2040 Trinkey - Adafruit 5248
A set of M2.5 size nylon screws, nuts and spacers, this product is a package of mounting hardware that allows the RP2040 QT Trinkey to be stacked with STEMMA QT..
5.00€
4-6 business days
Kailh Mechanical Key Switches - Linear - small mechanical button - black - 1 pc - Adafruit 5124
Linear mechanical switch in black color. It is used in the implementation of a wide range of projects, e.g. when building a proprietary, non-standard mechanical..
3.20€
4-6 business days
Kailh Mechanical Key Switches - Clicky - small mechanical button - blue - 1 pc - Adafruit 5123
The blue Clicky type mechanical switch is used in the implementation of a wide range of projects, e.g. when building a proprietary, non-standard mechanical keyb..
3.20€
4-6 business days
JST-XH connecting cable - socket + plug - 2.5mm raster - 500mm - Adafruit 5497
Connection cable by Adafruit, 500 mm long. The element has been terminated with JST-XH connectors - socket (female) and plug (male). The cable consists of two w..
3.90€
4-6 business days
STEMMA QT/Qwiic JST SH 4-Pin Cable - 300mm - Adafruit 5384
Cable with Qwiic/STEMMA QT connector made by Adafruit. The cable is 400 mm long and wrapped in flat, black rubber insulation. The cable is terminated with a 4-p..
4.10€
4-6 business days
Grove - Cable Pigtail - 4-pin connection cable - 10cm - Adafruit 5244
Connection cable from Adafruit. On one side it has four isolated wires (each in a different color), and on the other side, it has a connector compatible with th..
3.00€
4-6 business days
Woven Conductive Fabric
Durable conductive fabric. Its resistivity is less than 1 Ω per 30 cm of material in any direction. The size of the cloth is 200 x 200 mm and the weight is not ..
3.00€
4-6 business days
Capacitive touch screen TFT 2.8" 240x320px with microSD reader, Shield for Arduino, Adafruit 1947
Overlay for Arduino with capacitive TFT touch screen. Its diagonal is 2.8", resolution is 240x320px. The display has LED backlighting and individual pixel contr..
78.10€
Temporarily Out Of Stock
Touch display, TFT LCD 3.5 '' 320x480px with a microSD reader - Adafruit 2050
Touch display, graphic LCD TFT with a diagonal of 3.5 "and a resolution of 320 x 480 pixels with 18-bit color depth. Works with a voltage of 3.3 V and 5V, comm..
69.20€
Temporarily Out Of Stock
PN532 NFC / RFID controller 13.56MHz, Adafruit 364
Board allows you to read and save data from the NFC and RFID devices at 13.56 MHz. The module is based on the popular PN532 system, it has a built-in antenna po..
69.20€
Temporarily Out Of Stock
Feather nRF52 Pro Bluetooth LE, compatible with myNewt, Adafruit 3574
A small module from a Feather family, based on the nRF52832 system. Feather is designed for portable projects. It works with myNewt software. Board has a small ..
48.10€
Temporarily Out Of Stock
Graphic color display TFT LCD 2.2'' 320x240 px + microSD reader, SPI, Adafruit 1480
2.2" LCD TFT graphic display with 320x240 px resolution and 18-bit colour depth. It works with both 3.3 V and 5 V. It communicates via the SPI bus. Additionally..
44.90€
Temporarily Out Of Stock
Showing 281 to 300 of 372 (19 Pages)