Adafruit

Sort By:
Show:
24-bit ADC Module for Strain Gauges - HX711 - Adafruit 5974
Module from Adafruit with a precision 24-bit ADC, ideal for strain gauges and Wheatstone bridges. Equipped with selective amplification (channels A: 64x / 128x..
24.00€
4-6 business days
Conductive rubber cable for measuring the tensile force, Adafruit 519
Conductive rubber wire with a diameter of 2 mm and a length of 1 meter. It is used to measure stretching strength. During the stretching of the element, its res..
24.00€
4-6 business days
BMP280, digital barometer, pressure sensor 110kPa I2C / SPI 3-5V, STEMMA QT, Adafruit 2651
Module with digital barometer from Bosch enables the pressure measurement in the range from 300 to 1100 hPa with the accuracy of 1 hPa. The system is based on t..
24.00€
4-6 business days
Pro Trinket, Microcontroller module, 3.3V 12MHz, Adafruit 2010
ATmega328 AVR microcontroller module equipped with 32 KB flash memory, 18 digital pins, analog inputs, and 8 PWM channels. On the board, there is a microUSB con..
24.00€
4-6 business days
Mini PiTFT, display 1.14'' 135x240 px IPS, for Raspberry Pi, STEMMA QT, Adafruit 4393
Mini PiTFT is a color display compatible with Raspberry Pi minicomputer. It is equipped with an ST7789 chip. The resolution of the display is 135x240 px and the..
24.00€
4-6 business days
Adafruit Proximity Trinkey USB board with APDS9960 sensor Adafruit 5022
The module created by Adafruit is a combination of the Adafruit Trinket M0 board with the APDS9960 sensor. The sensor allows you to measure distance (proximity..
24.00€
4-6 business days
1.14'' TFT display 240x135px with microSD card reader - Adafruit 5766
A color TFT display with a diagonal of 1.14" and a resolution of 240 x 135 pixels with a microSD card reader from Adafruit is a device that can be used in many..
24.00€
4-6 business days
M0 GEMMA, a miniature platform with a 3.3 V microcontroller ATSAMD21E18, Adafruit 3501
Miniature round module with microcontroller ATSAMD21E18, equipped with 256 KB of Flash memory, 3 digital pins, analog input, and 2 channels of PWM. On board is ..
24.00€
4-6 business days
NeoSlider I2C - slide potentiometer with 4 NeoPixels - Adafruit 5295
Adafruit NeoSlider is a slide potentiometer with 4 NeoPixel LEDs. It uses the I2C protocol for communication. A small microcontroller built in the module conver..
24.00€
4-6 business days
Proto Tripler PiCowbell - Protoboard for Raspberry Pi Pico/PicoW - STEMMA QT/Qwiic - Adafruit 5967
Proto Tripler PiCowBell from Adafruit is a versatile expansion board for the Raspberry Pi Pico, allowing easy connection of sensors and displays without the ne..
24.00€
4-6 business days
NeoKey, key matrix for switches, NeoPixels 1x4, I2C, STEMMA QT/Qwiic, Adafruit 4980
NeoKey - key matrix for switches - 76.5 x 21.5 x 4.6 mm board manufactured by Adafruit. It has space for four buttons, including the Kailh socket. Thanks to the..
24.00€
4-6 business days
Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack - Red - STEMMA QT/qwiic
Adafruit Backpack module with a 7-segment display consisting of 4 digits with dots. The display diagonal is 0.56", and the module digits are highlighted in red...
24.00€
4-6 business days
MB85RC256V, 256Kb / 32KB FRAM non-volatile I2C memory, Adafruit 1895
Module with non-volatile FRAM memory for data storage which is characterized by low power consumption and very high durability. Each byte can be read or saved 1..
24.00€
4-6 business days
Pixel Trinkey - USB Driver for NeoPixel/DotStar - Adafruit 5953
The Adafruit Pixel Trinkey is a compact LED controller based on the SAMD21 chip (256 KB Flash, 32 KB RAM), ideal for driving NeoPixel and DotStar LEDs without ..
24.00€
4-6 business days
ADAFRUIT SI7021 TEMPERATURE & HUMIDITY SENSOR 3.3V-5V -10-85°C 0–80% RH
Adafruit Si7021 Temperature + Humidity Sensor. This sensor has ± 3% relative humidity measurements with a range of 0–80% RH, and ±0.4 °C temperature accuracy at..
24.00€
4-6 business days
DIY Magnetic Connector - simple 8-pin magnetic connectors - Adafruit 5469
Magnetic connectors are assembly elements that are very often used during prototyping systems, because they significantly facilitate and accelerate the process..
23.60€
4-6 business days
FeatherWing radio module Lora RFM69 433MHz, pad for Feather, Adafruit 3230
The module from the Feather family equipped with a radio module RFM69 433MHz of long-range (LoRa). Allows for the data transmission at a distance up to 500 m us..
23.30€
4-6 business days
I2C/SPI character LCD backpack - I2C/SPI converter for LCD display - STEMMA QT/Qwiic - Adafruit 292
I2C / SPI converter from Adafruit intended for LCD display. It works with any LCD display with a size from 8x1 to 20x4 characters and with a 16-pin connector l..
23.30€
4-6 business days
SPI Flash SD Card - XTSD 512MB - NAND Flash memory module - Adafruit 4899
SPI Flash SD Card by Adafruit is an SD card in SMT chip format that combines the advantages of SPI Flash memory with the functionality of an SD card, offering ..
23.20€
4-6 business days
LPS35HW pressure sensor, STEMMA QT, Adafruit 4258
Pressure sensor with integrated LPS35HW circuit. The measuring range of the module is from 260 hPa to 1260 hPa, with an accuracy of +/- 0,1% hPa. It can be used..
22.60€
4-6 business days
Showing 121 to 140 of 380 (19 Pages)