Automatic solar waterer

• Automatic flower watering control
• Ability to set irrigation times
• Watering interval settings
• Possibility to connect up to 40 irrigation tips
• A perfect solution for use at home or in the garden

The automatic controller allows you to water your plants in a controlled, organized way, even when you are away. The custom configuration function allows you to adjust the irrigation time and time intervals between watering.

Wide range of applications

The device is intended for indoor use only, for example in a grow tent, mini greenhouse, office or balcony. The custom configuration function allows you to adjust the irrigation time and time intervals between watering.

Possibility to connect up to 40 different places!

Simple installation

All you need to do is select a piece of hose that will suck water from the tank and install a filter on one of the sides, and connect the other end of the hose to the device. Then divide the hose into a length consistent with the distance of the pots to be served and connect the sections using connectors. Attach irrigation tips to the end of each cable and push them into the ground. Connect the beginning of the cable to the irrigation device.

Control

The control unit is intended for outdoor use in gardens and balconies. It can be mounted on the wall or plugged into the floor. You can set the controller to water and humidify your flowers and plants early in the morning or late at night, when the water evaporates least. The control unit will water your garden and flower boxes fully automatically, according to the set program. This way you can be sure that your plants will be watered even during your holidays.

The "Watering Time" display indicates the pump operating time. Numbers from 10-50 indicate time from 10 to 50 seconds. H1-H9 markings indicate time from 1 minute to 9 minutes

The "Interval Time" display indicates the time interval (interval) between subsequent pump starts. HH means an interval of 12 hours, numbers from 1 to 15 mean an interval from 1 to 15 days.

SIGNALING LED ON THE CONTROLLER - STATUS

The indicator light flashes slowly (every 10 seconds): The control panel has been programmed
The indicator light flashes quickly: The pump is running.
The indicator light is on continuously: The control panel is waiting for programming.
The indicator light is red: The battery is exhausted. The pump stops and waits until the batteries are charged. As soon as the batteries are charged, the indicator light will turn green.

CONTROL BUTTONS

Press the ON/OFF button to manually turn the pump on and off. During programming, press the On/Off button to increase or decrease watering time and pause time. Press the arrow key to set parameters. Press both arrow keys at the same time to lock or unlock all keys.

Note: If there is not enough water in the tank, an alarm sounds. Press any button to turn off the alarm.

PROGRAMMING EXAMPLE

Press one of the buttons. The light will turn on and the control panel is ready for programming. Example: You want your plants to be watered every day at 9:00 for 50 seconds.

Start programming at 9:00.

Press the left arrow and set the watering time to 50 (-50 seconds).

Press the right arrow and set the watering time to 50 (= 50 seconds).

(Interval Time) to 1 (= daily)

Wait 5 seconds for the setting to be saved automatically. Watering will start and the plants will be watered for 50 seconds. The next watering will take place at 9:00 a.m. the next day and the following days.

Specification:

• Possibility to connect: up to 40 irrigation tips
• Power supply: Solar

Set contains:

• 1x Solar controller
• 1x Cable 7/9 18m
• 1x Cable 4/6 12m
• 1x 4-way connector
• 20x 4-way connectors
• 40x Irrigation tip
• 3x Carriage cap
• 1x Filter
• User manual

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.