Blow

Sort By:
Show:
TLYp cable 2 x 0.22 p/c
Flat loudspeaker cable (p) with a multi-wire conductor and transparent PVC insulation. One of the veins marked in red. Used for internal connections, for conne..
0.40€
4-6 business days
Square on/off push switch
TECHNICAL DATA: - Contact load capacity: 1A 250V/3A 125V - Contact resistance: 20mΩ max. - Insulation resistance: 500VDC 100mΩ - Dielectric strength: 1500VAC/1..
0.60€
4-6 business days
CB PLUG-RCA SOCKET
The transition ended with a CB plug on one side and an RCA socket on the other. - Type: transition - Plug: CB - Socket: RCA - Packing: 10 pieces..
0.50€
4-6 business days
Transition: 3.5MN PLUG-ANTENNA JACK
Transition with a 3.5 mono Jack plug and an antenna socket. - Type: Transition - Plug: Jack 3.5 mono - Socket: antenna - Packing: 20 pieces..
0.30€
4-6 business days
Transition: S-VHS GN-GN
S-VHS pass-through terminated on both sides with an S-VHS socket. - Type: transition - Sockets: 2 x S-VHS..
0.40€
4-6 business days
Passage: ANT JACK - RCA JACK
High-quality adapter with an antenna socket and a screw-on RCA socket used in various antenna installations. - Connectors: 1 x antenna socket, 1 x screw-on RCA..
0.50€
4-6 business days
Passage: ANT JACK - RCA JACK
The passage is terminated with an antenna socket on one side and an RCA socket on the other. - Type: transition - Sockets: 1 x antenna, 1 x RCA - Packing: 5 pi..
0.50€
4-6 business days
F transition: F JACK - BNC JACK.
Adapter with "F" socket and BNC socket. - Socket: 1 x "F" and 1 x BNC - Material: metal - Packaging: 20 pcs..
0.60€
4-6 business days
F transition: F SOCKET F SOCKET barrel
F-type antenna connector made entirely of high-grade copper. The use of copper-type metal as a production material ensures perfect, lossless signal conduction,..
0.60€
4-6 business days
Antenna pass: WT-WT METAL
High-quality adapter with an antenna plug on both sides, used in various antenna installations. - Connectors: 2 x antenna plug - Material: metal - Packing: 20 ..
0.40€
4-6 business days
Antenna pass-through WT-GN METAL
High-quality transition with a plug on one end and an antenna socket on the other, used in various antenna installations. - Connectors: 1 x plug, 1 x antenna j..
0.60€
4-6 business days
Antenna pass: GN-GN METAL
High-quality passage ended with an antenna socket on both sides, enabling e.g. antenna cable extension. - Connectors: 2 x antenna jack - Material: metal - Pack..
0.50€
4-6 business days
IC Socket 24PIN
0.10€
4-6 business days
Bridge rectifier 3A/ 1000V (KBPC110)
Specification: - Maximum voltage: 1000V - Forward current: 3A - Single-phase bridge - Leads: wire, Ø 0.7mm, length: 21mm - Dimensions: 15x15x7mm..
0.40€
4-6 business days
Bridge Rectifier 2A/1000V KBP10
Specification: - Maximum voltage: 1000V - Forward current: 2A - Single-phase bridge - Leads: wire, Ø 0.75mm, length: 15mm - Dimensions: 15x3.6x13mm..
0.50€
4-6 business days
Condenser microphone 36-40db fi=6mm
>Height h: 2.7mm diameter Ø: 6mm sensitivity: 36-38db connection method: solder pads..
0.60€
4-6 business days
INDICATOR Neon 6mm (yellow) 230V
Yellow neon light. - Type: neon indicator - Width: 6mm - Voltage: 230V - Colour: yellow - Packing: 20 pieces..
0.60€
4-6 business days
INDICATOR Neon 6mm (red) 230V
Red neon light. - Type: neon indicator - Width: 6mm - Voltage: 230V - Red colour - Packing: 20 pieces..
0.60€
4-6 business days
Figure 8 AC power socket to housing
Figure 8 AC power socket with latch Technical data: Socket type: AC power, (figure-of-eight), C8 non-polarized Type: male Mounting: to the housing - latch Rate..
0.60€
4-6 business days
Copper tip 1.5mm2 /for soldering iron
Universal copper tip 1.5mm2 /for soldering iron The copper tip is intended for soldering irons. The high-quality gro has good thermal conductive properties, wh..
0.40€
4-6 business days
Showing 3741 to 3760 of 4986 (250 Pages)