Cable Guide 15x20 - 1m - Chain Cable Guide - CNC

This 15 x 20 mm, 1 m long cable guide helps organize cables where the cable moves with the machine. It's suitable for CNC machines, automation systems, small linear axes, workshop enclosures, and other locations where cables shouldn't hang freely or rub against structural elements.

Instead of loosely routed cables, you get a closed, segmented cable path. This is a practical solution when safety, tidiness of the installation, and reduced risk of insulation abrasion are key.

It is most often used where power, control, or signal cables move with the working element. ????

• CNC machines and plotters,
• sliding axes and linear systems,
• industrial automation,
• workstations and workshop structures,
• mobile cable installations in technical devices.

If you're building or upgrading a machine, a chain guide helps keep cables in a controlled path and reduces tangling during operation. ⚙️

This is a technical product, so before choosing, it's best to check whether the 15 x 20 mm size matches the number and diameter of cables you want to run. ????

A cable guide is a good choice when you need a compact solution for smaller cable bundles. If the cables are thick, there are a lot of them, or require a larger radius, it's worth comparing this option with larger models beforehand.

The set is 1 m long and its segmented design allows the section to be adapted to a specific machine or working axis.

• Cable organization – cables do not hang loosely and do not get tangled when moving.
• Mechanical protection – reduced risk of accidental bending, abrasion and insulation damage.
• Easier servicing – the cables are routed in one place, making it easier to assess the condition of the installation.
• Possibility of adjusting the length – the segmented construction makes it easy to shorten or extend the section.
• Better workspace organization – the installation looks cleaner and is more convenient for everyday use. ✅

The guide is made of reinforced PA66 nylon. This translates into good wear resistance and operation in demanding technical environments.

According to the specifications, the material is resistant to high temperatures, salt, acids, and alkalis, so the guide can be used not only in simple DIY projects but also in more demanding workshop and industrial applications. ????️

The chain creates a flexible path for the cables to be placed in. As the machine moves, the chain flexes in a controlled manner, allowing the cables to move with it rather than flexing randomly sideways.

This is especially important in systems where cables repeatedly perform the same motion. A well-routed harness operates more stably and is less susceptible to damage. ????

The segmented design allows for easy assembly and disassembly of the links, allowing you to adjust the chain length to suit your specific application. This is a convenient solution when building your own machine or modifying an existing system.

Before installation, it is worth:

• check the number and diameter of the wires,
• plan the traffic route,
• leave the cables with adequate working clearance,
• make sure that the guide will not interfere with the machine structure.

???? Too tight arrangement of cables inside the guide can make their operation difficult, so it is not worth filling it "butt-tight".

• Size selection: 15 x 20 mm guide is best used for cables that realistically fit within this cross-section.
• Movement path: the guide should operate within the intended range without lateral stresses.
• Cable type: in mobile installations it is best to use cables adapted to dynamic operation.
• Post-assembly inspection: After starting the machine, it is worth checking that the cables are not twisted and that they are not rubbing against the edges.

???? The guide itself organizes and protects the bundle, but does not replace the correct selection of cables and correct assembly of the entire installation.

Yes. The segmented design allows for easy assembly and disassembly of the links, so the length can be adjusted to suit the application.

Primarily for CNC machines, automation, and other devices with moving cables. The most important thing is to match the 15 x 20 mm size to the planned cable harness.

It helps reduce the risk of entanglement, chafing and accidental damage during movement, but effectiveness also depends on correct installation and proper cable selection.

Made of reinforced PA66 nylon, which works well in technical and workshop applications.

If you're looking for a compact cable guide for shorter or lighter cable bundles, this model is a practical choice. It combines a simple design, adjustable length, and is suitable for machines where cables need to move in a controlled manner. ⭐

This is a good element for building, repairing or organizing installations in CNC machines, automation systems and workshops without unnecessarily complicating the entire system.

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery  (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.

International delivery pricing through courier service

International shipping prices depend on geographic location:

Latvia - 5.50€ (incl. VAT)

Estonia - 6.50€ (incl. VAT)

Paid orders of more than 150€ are shipped for free to Latvia and Estonia.

other countries - negiotiated individually.

International delivery pricing to Omniva/Venipak parcel terminals

Latvia - 6.00€ (incl. VAT)

Estonia - 8.50€ (incl. VAT)

Payments:

We accept payments via PayPal for orders over 20€.