FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generator

Brand: FNIRSI
Product Code: 2C53T
Availability: Vilnius Store Out of Stock
Kaunas Store In Stock
Central Warehouse In Stock

92.10€
Ex Tax: 76.12€

Qty

Add to Wish List

Description Product Delivery

The FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post trigger), a multimeter up to 19999 and a 50 kHz signal generator. The input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The robust ABS housing with silicone coatings, a 2.8-inch 320×240 pixel display and a 3000 mAh battery (up to 4 hours of operation) guarantee mobility and continuous measurements even in harsh conditions. The device is certified CAT II 300V, with double ceramic fuses and a surge protection circuit. With the ability to save waveforms and update the software, you are always in control of your results and have access to the latest features.

Color display and multimeter

The 2.8-inch display with a resolution of 320 × 240 pixels displays waveforms in color with an “infinite backlight” function (fixes the signal curve on the screen even after it fades), maintaining the waveform curve on the screen. YT, rolling and XY modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability under any conditions. The integrated multimeter with a resolution of up to 19999 allows you to measure DC/AC current, small and large currents, resistance, capacitance, diodes, temperature and continuity (audible signal). Smart protections protect the user and equipment from overloads.

Advanced Hardware Architecture

A professional ARM + FPGA + high-performance ADC combination used in benchtop oscilloscopes ensures fast triggering and accurate signal representation. The trigger system offers edge (rising/falling), pulse width, image and slope modes with up to 50% pre-trigger and up to 50% post-trigger, so even the shortest anomalies are recorded without losing detail.

Signal Generator

The integrated function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing you to test filters, amplifiers and analog circuits without additional equipment.

Automatic measurement setup

The AUTO function adjusts the range and trigger lever with a single button, so the waveform can be viewed instantly without time-consuming setup. Support for additional Single and Normal modes simplifies operation for quick field measurements. A single click is enough to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This allows you to easily archive results and further analyze them in any environment.

Isolated measurement channels

Two completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference and improve measurement accuracy. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripple with maximum accuracy.

Robust construction

The ABS (acrylonitrile butadiene styrene - high-strength plastic) silicone-coated housing is resistant to drops and impacts, and the gold-plated PCB (printed circuit board) rails are corrosion-resistant. 3000 mAh battery guarantees up to 3 hours of operation. The foldable stand allows you to position the device at any angle, and ergonomic buttons and a USB-C port ensure convenient use and charging.

Included in the kit:

Portable 3-in-1 Oscilloscope FNIRSI 2C53T
10 measurement probes (2 pcs.)
Probe with crocodile clips
Multimeter leads
Charging cable
Carrying bag
Instruction

Specifications:

Screen 2.8 inch HD color screen
Resolution 320 × 240
Charging specifications USB-C (5V / 1A)
Rechargeable battery Lithium-ion 3000 mAh
Supported functions Oscilloscope, signal generator, multimeter (for more information, see function parameters)
Standby time 6 hours (laboratory maximum)
Language Chinese and English
Dimensions 167×89×35mm
Weight 300g

Oscilloscope parameters

Channels two channels
Sampling 250 MSa/s
Analog bandwidth 50 MHz (each channel separately 50 MHz)
Memory depth 1 thousand points
Impedance 1 MΩ
Time base range 10 ns - 20s
Vertical sensitivity 10 mV/effect - 10V/effect (×1)
Maximum measurement voltage ±400 V
Start mode AUTO / Normal / Single
Display mode YT / Rolling / XY
Coupling Variable / constant
Trace retention OFF, 500 ms, 1 s, ∞.
Mathematical functions 8 basic operations + FFT
Waveform extraction recording yes
Waveform image export yes
Cursor measurement yes

Signal generator parameters

Channel single channel
Frequency 1 Hz–50 kHz
Amplitude 0.1–3.0V

Multimeter parameters

DC voltage 1.9999 V / 19.999 V / 199.99 V / 1000 V ± (0.5 %+3)
AC voltage 1.9999 V / 19.999 V / 199.99 V / 750.0 V ± (1 %+3)
DC current 19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ± (1.2 %+3)
AC current 19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ± (1.5 %+3)
Resistance 9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ± (2.0 %+3)
Capacitance 9.999 mF / 99.99 mF ± (5.0 %+20)
Temperature -55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 % + 5)
Diode measurement Yes
Continuity test Yes

Tags: fnirsi, 2c53t, portable, 3in1, oscilloscope, multimeter, signal, generator, oscilloscopes

Claim orders from Stores

You can claim your purchased items within 1 - 4 work days after making an order (if product is in local warehouse).

Please wait for an email notification regarding Your order status update.

Vilnius Store address: Vytenio g. 20, LT-03229 Vilnius, Lietuva

Kaunas Store address: Pramonės pr. 4D, LT-51329, Kaunas, Lietuva

Local delivery in Lithuania

Purchased items are delivered locally through Venipak service. Depending on availability of items, orders are processed within 1-3 work days. Orders made until 1AM are shipped the same day.

Local delivery (1-4 w.d.) price for items of any size is through through courier service is 4.90€ (incl. VAT), if the amount of the shopping cart exceeds 150€ - delivery is free.

Local delivery price to Venipak parcel terminals (1-3w.d.) is 2.90€ incl. VAT, if the amount of the shopping cart exceeds 50€ - delivery is free.

Local delivery price to Omniva parcel terminals (1-3w.d.) is 3.90€ incl. VAT,if the amount of the shopping cart exceeds 70€ - delivery is free.

Payment on delivery (COD) +2.00€ (incl. VAT).

You can pay for the goods at the time of delivery to the courier in cash or by credit card. Payment to Omniva parcel terminals is only possible by bank card.

A separate delivery fee applies to oversized items, regardless of the amounts and conditions stated above.