Leakage Current Tester, 10~1000mA; 0~2000mS @ 0°/180°; 30~480V; AUTO RMAP test; UNI-T

Specification

Conditional tripping current

Fault tripping time

Accuracy
(current)

Accuracy
(time)

RCD test function

X1/2

10/20/30/100/300/500mA/1000mA

0~2000mS @0°/180°

-10%~0%

±0.6% of rdg ±4 digits

X1

10/20/30/100/300mA

0~2000mS @0°/180°

0%~+10

±0.6% of rdg ±4 digits

500mA/1000mA

0~200mS @0°/180°

0%~+10

±0.6% of rdg ±4 digits

X2

10/20/30/100/200/300/500mA

0~200mS @0°/180°

0%~+10

±0.6% of rdg ±4 digits

X5

10/20/30/100/200mA

0~200mS @0°/180°

0%~+10

±0.6% of rdg ±4 digits

CAR

10/20/30/100/300/500mA/1000mA

300ms @ 15 0°/180

-10%~+10

±0.6% of rdg ±4 digits

Manual

10/20/30/100/300/500mA/1000mA

300 ms at 0°/180°

-10%~+10

±0.6% of rdg ±4 digits

Operating voltage

50/60Hz

100V~440V
(Note: If > 450 V, an alarm will be issued and the RCD test will be stopped)

-15%~+10

Voltage test

Voltage range

30~480V (resolution: 1V)

45~65Hz

±3% of rdg ±3 digits

Voltage test

L-PE

yes, shows L-PE input voltage;
range: 30V~480V; No input and low voltage: “0V”;
if less than 30 V: 480 V

Frequency

yes, shows the L-PE input frequency;
When "volts" is displayed, press the "VOLT/FREQ" key to switch "Voltage/Frequency"

Checking the wiring

If there is no contact, no current, or insufficient power, the LCD screen will display a flashing “L-PE”.

Phase angle selection

You can choose to start the test from the positive (0°) or negative (180°) half-cycle. Press the “0°/180°” button to switch the phase angle.

Lock test

After disconnecting the power, press and hold the "0°/180°" button to activate the lock test function. Simply connect the test leads to the test points correctly, and the test will be performed automatically.

AUTO RAMP test

You can test tripping current and operating time simultaneously.

RCD test exceeds limit

When the shutdown operation time exceeds the maximum test duration and shuts down.

Overheat detection

If the internal components of the device overheat, an overheating symbol appears on the LCD screen and the device automatically disables RCD testing.

Backlight

Yes, can be turned on/off

Low battery indicator

Yes

Automatic shutdown

The device will automatically turn off after 5 minutes of inactivity.

Work environment

0℃ ~ 40

Storage environment

-20°C ~ 60°C

Power supply

8 * 1.5V AA

Pollution level

2

Safety rating

IEC61010-031; IEC61557-1.6; CAT III 600V

General characteristics

Product color

Red + gray

Product weight

725

Product dimensions

161*117*68mm

Standard accessories

User manual 1 pc.; test leads 1 set (red/green); contact clamps 2 pcs. (red/green); test probes 2 pcs. (red/green); 1.5V AA * 8 pcs.; test lead with EU plug 1 pc.

Standard packaging

Carton box: 4 pcs.

Package dimensions

585×380×335