Sort By:
Availability:
Show:
Brushless motor driver (BLDC) Dualsky 6A v2
Rotational speed controller with 12 V and 6 A capacity from Dualsky for brushless 3-phase motors.Specification:6 A continuous current (temporary up to 10 A)2-3 ..
32.20€
3-5 business days
Grove, PCA9685, 16-channel servo driver, 12-bit PWM I2C
Grove series module equipped with a precise, 12-bit PWM signal generator. Allows you to control up to 16 servos using an external power source. It uses I2C inte..
23.00€
3-5 business days
TB67S249FTG, Stepper Motor Driver 47V/1.6A with headers, Pololu 3097
TB67S249FTG Stepper Motor Driver with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboa..
20.90€
3-5 business days
Stepper motor driver A4988 RepRap - green
Stepper motor driver based on the A4988 system. Voltage supply in the range from 8 V to 35 V, with maximum current consumption of 1 A per coil. Maximum resoluti..
4.10€
3-5 business days
Cytron SC08A - 8-channel server driver - UART
An 8-channel servo controller. It communicates via a UART serial interface with a microcontroller or with a computer via USB using a USB to UART converter. It h..
24.60€
3-5 business days
PWM motor driver DC 6-24V/3A/72W, with a speed control knob
Module with a built-in rotary potentiometer for DC motor speed control by filling the PWM signal. It operates with motors from 6 V to 24 V up to 72 W (current c..
15.10€
3-5 business days
Haptic Motor Driver, DRV2605L, SparkFun ROB-14538
SparkFun module with DRV2605L haptic motor controller. It can handle ERM (Eccentric Rotating Mass) and LRA (Linear Resonance Actuator) motors. It works with vol..
14.50€
3-5 business days
L298N Dual H Bridge DC Stepper Motor Driver Board - Iduino ST1112
Module with a two-channel direct current motor controller L298N. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The system has a built-in v..
6.20€
3-5 business days
Cytron SmartDriveDuo MDDS10 - two-channel 35V/10A motor controller
Two-channel intelligent DC motor controller. Continuous current per channel 10 A (momentary 30 A). Supply voltage from 7 V to 35 V. It has interfaces such as UA..
72.20€
3-5 business days
Cytron MDD10A - dual-channel 30V/10A motor controller
Two-channel DC motor controller. The continuous current per channel is 10 A (momentary 30 A). The supply voltage is 5 V to 30 V. The controller works with logic..
33.60€
3-5 business days
Stepper motor driver L9110 12V/0.8A
The driver module uses L9110 chips to control one stepper motor or two DC motors. The supply voltage is from 3 V to 12 V. Continuous current up to 800 mA. The m..
3.70€
3-5 business days
A4988 - RepRap 35V / 2A stepper motor driver - Pololu 1182
Stepper motor driver based on the A4988 system. It is powered with the voltage in the range of 8 - 35 V, with a maximum current consumption of 2 A per coil. Ma..
21.60€
3-5 business days
DRV8834 stepper motor driver Low-Voltage 10.8V 2A, Pololu 2134
Stepper motor controller based on the DRV8834 system allows you to control a motor with a current consumption of up to 1.5 A (momentary up to 2 A) per coil, wit..
12.60€
3-5 business days
A4988 Black - RepRap 35V / 2A stepper motor driver - Pololu 2128
Stepper motor driver based on the A4988 system. It is powered with the voltage in the range of 8 - 35 V, with a maximum current consumption of 2 A per coil. Ma..
21.70€
3-5 business days
TB67S279FTG Stepper Motor Driver Carrier, Pololu 2973
Stepper motor driver based on TB67S249FTG chip. Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4.5 A per coil. Maximum resolutio..
21.70€
3-5 business days
MP6500 Stepper Motor Driver Carrier, Digital Current Control, Pololu 2966
Stepper motor controller based on MP6500 system. Powered from 4.5 - 35 V, with maximum current consumption of 2.5 A per coil. Maximum resolution: 1/8th step. Th..
20.90€
3-5 business days
STSPIN220 Low-Voltage Stepper Motor Driver Carrier, Pololu 2876
Stepper motor controller powered from 1.8 V to 10 V. Maximum resolution: 1/256 of the cage. Can operate without the use of heat sink or forced airflow at 1.1 A ..
12.60€
3-5 business days
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered), Pololu 2967
Stepper motor controller based on MP6500 system. Powered from 4.5 V to 35 V, with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/8th ste..
25.40€
3-5 business days
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered), 2A, Pololu 2969
Stepper motor controller based on MP6500 system. Powered from 4.5 V to 35 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8th step...
13.20€
3-5 business days
MP6500 Stepper Motor Driver Carrier, Digital Current Control, 2A, Pololu 2968
Stepper motor controller based on MP6500 system. Powered from 4.5 V to 35 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8th step...
11.20€
3-5 business days
Showing 61 to 80 of 255 (13 Pages)