Sort By:
Show:
DFRobot DFR0627 Gravity I2C 2x UART converter
Module allows to derive two UART interfaces from the I2C interface. Maximum transmission speed is 1 Mb/s, each UART interface has an independent FIFO buffer 256..
11.70€
Temporarily Out Of Stock
DS2413 1-wire controller for 2 GPIO Adafruit 1551
The module is based on a DS2413 which has two GPIO pins type Open Drain. It allows you to have two GPIO pins controlled from one microcontroller pin. It also wo..
12.60€
Temporarily Out Of Stock
24V to 5V 4 Channel Optocoupler Isolation Board Isolated Module PLC Signal Level Voltage Converter Board 4 Bit
12.20€
Temporarily Out Of Stock
SOP16 SOIC16 Test Clip Module With Cable For EEPROM 93CXX / 25CXX / 24CXX In Circuit Programming
TEST CLIP, SOIC16/ SOP16Connector type: Test ClipPin format: SOIC / SOPPackage include:1x SOP16 Clip1x Cable1x Adapter Board ..
12.10€
Temporarily Out Of Stock
RS232 Serial DB9 Pin Male to USB 2.0 PL-2303 Cable
Full compliance with USB 1.1 &1.0 & 2.0 specification Convert RS232 interface device to USB for connecting PC Over 1 Mbps data transfer rate Supports w..
12.20€
Temporarily Out Of Stock
Expansion module for connecting DS18B20 sensors - 1-Wire - STEMMA JST PH 2mm - Adafruit 5971
Module from Adafruit that makes it easy to connect DS18B20 sensors in a daisy chain. Equipped with a JST PH 3-pin connector and screw terminals, it allows quic..
11.20€
Temporarily Out Of Stock
Lead expander - 4 channel - with I2C multiplexer - PCA9546 - STEMMA QT/Qwiic - Adafruit 5664
Module with a multiplexer manufactured by Adafruit and equipped with the PCA9546 chip, which is a replacement for the popular TCA9548A chip. The module allows y..
10.70€
Temporarily Out Of Stock
SparkFun CD74HC4067 Analog/Digital MUX Breakout 16 channel
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.It works with both digital and analog signals (the vo..
11.40€
Temporarily Out Of Stock
TTL to RS485 Converter with Galvanic Isolation - Waveshare 27479
The TTL to RS485 Converter (C) is a compact, professional module designed to convert TTL signals (3.3V/5V) to a differential RS485 signal, enabling stable comm..
9.40€
Temporarily Out Of Stock
M.2 Key M to Key A adapter with USB Conversion - for PCIe devices - Waveshare 20315
M.2 Key M to Key A adapter created by Waveshare company. The module allows you to connect M.2 devices with the Key A standard to M.2 slot in the Key M standard...
9.10€
Temporarily Out Of Stock
MCP23017 Expansion Board for Arduino and Raspberry Pi - Waveshare 15391
Expander of pins on the basis of the MCP23017 system, it extends the capabilities of the Arduino or Raspberry Pi with additional 16 pins of I/O. It communicates..
10.10€
Temporarily Out Of Stock
BestSeller
CH341A Gold SPI flash programmer
  AMIC: A25L05P, A25L10P, A25L20P, A25L40P, A25L80P, A25L16P ATMEL: AT25DF041A, AT25DF321, AT25F004, AT25F512A, AT25F2048, AT25F4096, AT25F1024A, AT..
9.60€
Temporarily Out Of Stock
SparkFun Opto-isolator Breakout
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy sy..
9.70€
Temporarily Out Of Stock
BestSeller
ADS1115 16 Bit ADC 4 Channel Module
Description:   For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision a..
9.30€
Temporarily Out Of Stock
ATtiny1616 Breakout - extension for Arduino - with connectors - STEMMA QT/Qwiic - Adafruit 5690
ATtiny1616 Breakout is a module produced by Adafruit, which acts as a pin expander. It is designed to be used with boards that use the I2C bus, such as Arduino ..
8.80€
Temporarily Out Of Stock
Extra EEPROM memory - I2C Qwiic - 512kb - SparkFun COM-18355
The board was created by SparkFun, equipped with additional CAT24C512 EEPROM memory. The board with 512 kb of EEPROM can be used with modules that do not have b..
8.80€
Temporarily Out Of Stock
SN65HVD230 CAN Board, Waveshare 3945
The module is based on the SN65HVD230 system that allows you to connect the microcontroller to the CAN bus. Communication is via the serial interface - RX, TX. ..
8.30€
Temporarily Out Of Stock
ATSAMD09 Seesaw I2C, Adafruit 3657
Seesaw ATSAMD09 is a universal framework transducer that expands the number of pins for microcontrollers or microcomputers with an I2C interface, e.g. Arduino, ..
8.80€
Temporarily Out Of Stock
Showing 261 to 274 of 274 (14 Pages)

Discover Our Range of Programmers and Converters

At Anodas.lt, we specialize in providing high-quality programmers and converters for microcontrollers, ensuring you have all the tools you need for your electronics projects. Our extensive selection includes microcontroller programmers, USB ESP8266 adapters, PICKIT programmers, and OBD II diagnostic modules from trusted brands like SparkFun. Whether you are a hobbyist, a student, or a professional engineer, our products are designed to meet your programming and debugging needs.

Why Choose Microcontroller Programmers?

Microcontroller programmers are essential tools for anyone working with embedded systems. They allow you to upload code to microcontrollers, enabling them to perform specific tasks. Our range includes versatile options that support various microcontroller families, making it easier than ever to get your projects up and running.

One of the standout options we offer is the USB ESP8266 programmer. This compact device allows you to easily program and debug ESP8266 modules, which are widely used in IoT applications. With this programmer, you can streamline your development process and enhance your project's capabilities.

Debuggers for Smooth Development

Debugging is a crucial step in any development cycle. Our selection of debuggers ensures that you can identify and fix issues in your code efficiently. The PICKIT programmers are particularly popular for their reliability and user-friendly interfaces, allowing both beginners and experienced developers to debug their projects with confidence.

Converters for Enhanced Connectivity

In addition to programmers and debuggers, we also offer converters that facilitate communication between different devices. Whether you need to convert signals or interfaces, our products ensure compatibility and seamless connectivity. Our OBD II diagnostic modules are perfect for automotive applications, allowing you to interface with vehicle diagnostics and enhance your automotive projects.

Why Purchase from Anodas.lt?

Choosing Anodas.lt for your electronic needs comes with numerous advantages. We pride ourselves on offering competitive prices, making high-quality electronics accessible for everyone. Our products are sourced from reputable manufacturers, ensuring you receive reliable equipment that meets industry standards.

Additionally, we understand the importance of fast delivery. Once you place your order, our team works diligently to ensure your products reach you as quickly as possible. This dedication to timely shipping means you can focus on your projects without unnecessary delays.

Furthermore, our professional and friendly customer service team is always ready to assist you. Whether you have questions about product specifications or need support with your purchase, we are here to help you make informed decisions and ensure a smooth shopping experience.

Shop Now at Anodas.lt

Explore our extensive range of programmers and converters today and take your electronics projects to the next level. With Anodas.lt, you can trust that you are getting quality products, competitive prices, and exceptional service. Start shopping now and experience the difference!